Re: HMC and firmware upgrade Was: Power Outage Checklist? -- MIDRANGE-L

× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.

No, it's normal. Most likely on your system it will finish before you notice the screen change.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

On 5/24/2012 2:06 PM, Jeff Crosby wrote:

Butting in here. I have never done this option in STRSST. Should I be
nervous that this screen comes up on my System i 520:

Internal processing is being done to display the
configuration of the system power control network.

Up to five minutes may be required from the
time you press the Enter key at this display.

Press Enter to continue.

On Thu, May 24, 2012 at 2:56 PM,<rob@xxxxxxxxx> wrote:

> One thing you can check is
> STRSST
> 1. Start a service tool
> 7. Hardware service manager
> 5. System power control network (SPCN)
> Press Enter to continue.
>
> Anything other than No in the Fault column?
> Try a display detail on a few and see if anything looks out of the
> ordinary.
>
>
> Rob Berendt
> --
> IBM Certified System Administrator - IBM i 6.1
> Group Dekko
> Dept 1600
> Mail to: 2505 Dekko Drive
> Garrett, IN 46738
> Ship to: Dock 108
> 6928N 400E
> Kendallville, IN 46755
> http://www.dekko.com
>
> --

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.