× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



If your interested in the ipl steps you can call qwccrtec and take a look
at the spooled file.

On Wed, Feb 8, 2012 at 3:49 PM, Rich Loeber <rich@xxxxxxxxx> wrote:

Jim,

Thanks .... after posting the question I found that setting in the IPL
attributes and I think you hit the nail on the head. It will be an easy
test for me to set this to *NO and then see if that clears up the
conflicts. I also found the QWCRIPLA API so I can see how this is set to
start with and restore the correct setting .... since I plan on doing
this
on a customer's machine, you don't want to reset the value to something
that they are not expecting.

Thanks.

Rich Loeber - @richloeber
Kisco Information Systems
[1]http://www.kisco.com
SDG


--------------------------------------------------------------------------

On 2/8/2012 3:43 PM, Jim Oberholtzer wrote:

Rich,

It sounds a bit like your asking about the TCP/IP servers. If you need
to control that use CHGIPLA to stop TCP from starting with
QSYSWRK/QUSRWRK start and then start TCP/IP and the balance of the TCP
servers manually in the start up program per your needs.

A discussion of the IPL steps from LIC to OS can be found at the Info
center under Systems Management, Work Management, Reference, IPL System
reference codes. Until the system is at a point where the the start up
program runs there's not much you can do with it unless you manually
IPL, then you have a small amount more control... but I sense the start
up program is what your looking for.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 2/8/2012 2:31 PM, Rich Loeber wrote:

Does anyone know where I can find a description of the sequence of steps
and when they get processed during an IPL? I have some OS maintenance
I
want to do during the QSTRUP program, some of which affects exit point
registration. I'm finding that some server functions are getting
started
before I can complete what I need to do in the QSTRUP and the results
are
not always pretty. It would help to know what is happening during the
IPL
at each stage and what triggers each event to happen.

Rich Loeber - @richloeber
Kisco Information Systems
[1][2]http://www.kisco.com
SDG

References

Visible links
1.http://www.kisco.com/
--

References

Visible links
1. http://www.kisco.com/
2. http://www.kisco.com/
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.