× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



When you changed the mother board the xSeries service processors IP address changed which is configured in the service processor configuration on the iSeries < WRKNWSCFG TYPE(*SRVPRC) > .

You need to get into the BIOS to discover the IP address for the xSeries service processor and change the service processor configuration object on the iSeries.

You can also use a host name for the service processor but I am assuming that you used the IP address rather than a host name because you ran into this problem.

Documentation can be found at:
http://www-03.ibm.com/systems/i/advantages/integratedserver/iscsi/solution_guide.html

IBM iSeries software support can also help you through this issue.

Good Luck,

Rich Sanfilippo
MCS
www.maximumcomputer.com

________________________________

From: midrange-l-bounces@xxxxxxxxxxxx on behalf of midrange-l-request@xxxxxxxxxxxx
Sent: Thu 1/5/2012 2:47 PM
To: midrange-l@xxxxxxxxxxxx
Subject: MIDRANGE-L Digest, Vol 11, Issue 15



Send MIDRANGE-L mailing list submissions to
midrange-l@xxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.midrange.com/mailman/listinfo/midrange-l
or, via email, send a message with subject or body 'help' to
midrange-l-request@xxxxxxxxxxxx

You can reach the person managing the list at
midrange-l-owner@xxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of MIDRANGE-L digest..."


*** NOTE: When replying to this digest message, PLEASE remove all text unrelated to your reply and change the subject line so it is meaningful.

Today's Topics:

1. Re: How much disk ? (rob@xxxxxxxxx)
2. Re: How much disk ? (rob@xxxxxxxxx)
3. RE: Help - iSCSI attached server motherboard replaced and now
server's not coming up... (Pete Massiello - ML)
4. Re: How much disk ? (Jim Oberholtzer)
5. AFP Overlay w/*SCS Spool File (Rich Loeber)


----------------------------------------------------------------------

message: 1
date: Thu, 5 Jan 2012 13:31:58 -0500
from: rob@xxxxxxxxx
subject: Re: How much disk ?

WRKSYSSTS on a guested partition does NOT show the same number as the
partition hosting it. It will be smaller.

WRKDSKSTS on a guested partition does NOT show the same number of disks as
the partition hosting it.

So I am trying to figure out what he is seeing.

Rob Berendt
--
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com <http://www.dekko.com/>





From: Jim Oberholtzer <midrangel@xxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>,
Date: 01/05/2012 12:52 PM
Subject: Re: How much disk ?
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Jerry:

Do I read into your comment that at least two of the three partitions
are hosted by IBM i? If that's so you can use WRKNWSSTG to determine
how much space is allocated to each partition. I jump to that
conclusion because that is the only way I am aware of that a WRKSYSSTS
command could show the storage for multiple partitions.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 1/5/2012 10:35 AM, GKern@xxxxxxxxxxxxxxxx wrote:
Thanks Larry - I did look at wrksyssts and that tells me my total system
asp (for all three partitions).

Wrkdsksts shows the same thing on all three partitions - 12 disks, all
the
same size - just different percentage used.

I know we have plenty of space - we just want to know how much is
allocated to our domino partition.

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx



From:
DrFranken<midrange@xxxxxxxxxxxx>
To:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:41 AM
Subject:
Re: How much disk ?



SST is certainly one way. Or in the O/S WRKDSKSTS gets you what you
need
also. And then WRKHDWRSC *STG will let you drill down the controllers
and
find the disk units as well. Normally you don't need to use SST if
you're
only after 'how many', 'what size', and 'what feature' (Meaning SAS -vs-
SCSI, RPM, etc.)

And of course WRKSYSSTS gets you the 50,000 ft flyover view of total
capacity and percent used if you don't care what type or protection of
the
disks.

- Larry

On 1/5/2012 10:31 AM,GKern@xxxxxxxxxxxxxxxx wrote:
Hi Larry,

No we aren't using VIOS. By traditional tools you mean SST?

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx


From:
DrFranken<midrange@xxxxxxxxxxxx>
To:
Midrange Systems Technical Discussion<midrange-l@xxxxxxxxxxxx>
Cc:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:28 AM
Subject:
Re: How much disk ?




Jerry,

Good luck with that!:-) Are you using VIOS for hosting your other
partitions? If so you can find out the disk mappings for that. (I won't
detail that here unless you reply affirmatively)

If not then you need to look in each partition with the traditional
tools there.

- Larry "DrFranken" Bolhuis

On 1/5/2012 9:53 AM,GKern@xxxxxxxxxxxxxxxx wrote:
I spent some time in the HMC probing various options but didn't find
anything that resembled what I'm looking for.

Where do I find the total amount of disk, and where can I find how
much
is
allocated to each of my three partitions?

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




------------------------------

message: 2
date: Thu, 5 Jan 2012 13:39:23 -0500
from: rob@xxxxxxxxx
subject: Re: How much disk ?

So do you have 36 physical disks - twelve on each partition of i, and one
i partition is running Domino?

If so, STRSST, 3. Work with disk units, 1. Display disk configuration, 1.
Display disk configuration status should have different serial numbers on
the disks based on which lpar you are looking at.

Some other interesting utilities are RTVDSKINF and PRTDSKINF *SYS. Systems
with Domino often have significant space in "User directories"
% of Size in
Description Disk 1,000,000 bytes
User libraries 43.12 2737313.23
User directories 23.46 1489057.31
Folders and documents .00 1.33
QSYS .10 6658.08
Other IBM libraries 1.01 64191.36
Licensed Internal Code .14 8670.70
Temporary space 2.54 161097.58
Unused space 29.48 1871254.78
System internal objects .14 8956.27
Objects not in a library .00 .00
TOTAL 99.99 6347200.64

Another useful combo is RTVDIRINF and PRTDIRINF

Description
(1) Total space used by this directory
(2) Total space used by objects in this directory and subdirectories


Directory . . : /NOTES01
Number of % of Size in
Objects Disk Megabytes
(1) 1 .00 .00
(2) 154627 2.57 155844.08


Directory . . : /ARCHIVE1
Number of % of Size in
Objects Disk Megabytes
1 .00 .00
800455 13.72 830871.19

Rob Berendt
--
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com <http://www.dekko.com/>





From: GKern@xxxxxxxxxxxxxxxx
To: DrFranken <midrange@xxxxxxxxxxxx>,
Cc: midrange-l@xxxxxxxxxxxx
Date: 01/05/2012 11:45 AM
Subject: Re: How much disk ?
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Thanks Larry - I did look at wrksyssts and that tells me my total system
asp (for all three partitions).

Wrkdsksts shows the same thing on all three partitions - 12 disks, all the

same size - just different percentage used.

I know we have plenty of space - we just want to know how much is
allocated to our domino partition.

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx



From:
DrFranken <midrange@xxxxxxxxxxxx>
To:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:41 AM
Subject:
Re: How much disk ?



SST is certainly one way. Or in the O/S WRKDSKSTS gets you what you need

also. And then WRKHDWRSC *STG will let you drill down the controllers and

find the disk units as well. Normally you don't need to use SST if you're
only after 'how many', 'what size', and 'what feature' (Meaning SAS -vs-
SCSI, RPM, etc.)

And of course WRKSYSSTS gets you the 50,000 ft flyover view of total
capacity and percent used if you don't care what type or protection of the

disks.

- Larry

On 1/5/2012 10:31 AM, GKern@xxxxxxxxxxxxxxxx wrote:
Hi Larry,

No we aren't using VIOS. By traditional tools you mean SST?

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx


From:
DrFranken <midrange@xxxxxxxxxxxx>
To:
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Cc:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:28 AM
Subject:
Re: How much disk ?




Jerry,

Good luck with that! :-) Are you using VIOS for hosting your other
partitions? If so you can find out the disk mappings for that. (I won't
detail that here unless you reply affirmatively)

If not then you need to look in each partition with the traditional
tools there.

- Larry "DrFranken" Bolhuis

On 1/5/2012 9:53 AM, GKern@xxxxxxxxxxxxxxxx wrote:
I spent some time in the HMC probing various options but didn't find
anything that resembled what I'm looking for.

Where do I find the total amount of disk, and where can I find how much
is
allocated to each of my three partitions?

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx


This e-mail message, including any attachments, is for the sole use of
the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized use, disclosure or distribution is
prohibited. If you are not the intended recipient, please inform the
sender by reply e-mail and destroy this and all copies of this message.





This e-mail message, including any attachments, is for the sole use of the

intended recipient(s) and may contain confidential and privileged
information. Any unauthorized use, disclosure or distribution is
prohibited. If you are not the intended recipient, please inform the
sender by reply e-mail and destroy this and all copies of this message.




This e-mail message, including any attachments, is for the sole use of the

intended recipient(s) and may contain confidential and privileged
information. Any unauthorized use, disclosure or distribution is
prohibited. If you are not the intended recipient, please inform the
sender by reply e-mail and destroy this and all copies of this message.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




------------------------------

message: 3
date: Thu, 5 Jan 2012 18:42:36 +0000
from: Pete Massiello - ML <pmassiello-ml@xxxxxxxxxxxx>
subject: RE: Help - iSCSI attached server motherboard replaced and now
server's not coming up...

Charles,

In the remote system definitions (Use Ops Nav, and go under iSCSI) you tell it the serial number so it can identify which server to turn on/off, I wonder if this has changed? But your message said Service Processor, which is really something that you define when you are creating the iSCSI environment. Since you have three of these, you can probably just get into the tools and see how everything is defined.

I have set these up in the past at a few places, but I don't remember all the places you enter serial numbers and addresses off the top of my head.

Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com <http://www.itechsol.com/>

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Charles Wilt
Sent: Thursday, January 05, 2012 12:26 PM
To: Midrange Systems Technical Discussion
Subject: Help - iSCSI attached server motherboard replaced and now server's not coming up...

Got a phone call from a small company I used to work for and still do some development work for...

They have a couple of Windows servers attached to there 520(?) via iSCSI.

One of the servers had a failure, IBM came out and replaced the MB, but when they powered up the server they are seeing an error about the Service Processor address not being right (or something like that)....

The IBM tech didn't know what to do and simply left?!?

I didn't set up the hardware, nor do I have know much about the iSCSI attached stuff. They are trying to contact the BP from whom the bought the hardware and whom they paid to set it up.

In the meantime, thought I'd throw this message out here to see if anybody had any experience or knew of links to documentation from IBM on how to recover..

PM me if you're interested in contacting the company directly, I'd image that a reasonable fee for your services could be arranged.

Thanks!
Charles
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.



------------------------------

message: 4
date: Thu, 05 Jan 2012 13:34:43 -0600
from: Jim Oberholtzer <midrangel@xxxxxxxxxx>
subject: Re: How much disk ?

Rob,

My comment would only apply to the host partition, not one of the guests.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 1/5/2012 12:31 PM, rob@xxxxxxxxx wrote:
WRKSYSSTS on a guested partition does NOT show the same number as the
partition hosting it. It will be smaller.

WRKDSKSTS on a guested partition does NOT show the same number of disks as
the partition hosting it.

So I am trying to figure out what he is seeing.

Rob Berendt
-- Group Dekko Dept 1600 Mail to: 2505 Dekko Drive Garrett, IN 46738
Ship to: Dock 108 6928N 400E Kendallville, IN 46755
http://www.dekko.com <http://www.dekko.com/> From: Jim Oberholtzer <midrangel@xxxxxxxxxx> To:
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>, Date:
01/05/2012 12:52 PM Subject: Re: How much disk ? Sent by:
midrange-l-bounces@xxxxxxxxxxxx Jerry: Do I read into your comment
that at least two of the three partitions are hosted by IBM i? If
that's so you can use WRKNWSSTG to determine how much space is
allocated to each partition. I jump to that conclusion because that is
the only way I am aware of that a WRKSYSSTS command could show the
storage for multiple partitions. Jim Oberholtzer Chief Technical
Architect Agile Technology Architects On 1/5/2012 10:35 AM,
GKern@xxxxxxxxxxxxxxxx wrote:
Thanks Larry - I did look at wrksyssts and that tells me my total system
asp (for all three partitions).

Wrkdsksts shows the same thing on all three partitions - 12 disks, all
the
same size - just different percentage used.

I know we have plenty of space - we just want to know how much is
allocated to our domino partition.

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx



From:
DrFranken<midrange@xxxxxxxxxxxx>
To:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:41 AM
Subject:
Re: How much disk ?



SST is certainly one way. Or in the O/S WRKDSKSTS gets you what you
need
also. And then WRKHDWRSC *STG will let you drill down the controllers
and
find the disk units as well. Normally you don't need to use SST if
you're
only after 'how many', 'what size', and 'what feature' (Meaning SAS -vs-
SCSI, RPM, etc.)

And of course WRKSYSSTS gets you the 50,000 ft flyover view of total
capacity and percent used if you don't care what type or protection of
the
disks.

- Larry

On 1/5/2012 10:31 AM,GKern@xxxxxxxxxxxxxxxx wrote:
Hi Larry,

No we aren't using VIOS. By traditional tools you mean SST?

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx


From:
DrFranken<midrange@xxxxxxxxxxxx>
To:
Midrange Systems Technical Discussion<midrange-l@xxxxxxxxxxxx>
Cc:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:28 AM
Subject:
Re: How much disk ?




Jerry,

Good luck with that!:-) Are you using VIOS for hosting your other
partitions? If so you can find out the disk mappings for that. (I won't
detail that here unless you reply affirmatively)

If not then you need to look in each partition with the traditional
tools there.

- Larry "DrFranken" Bolhuis

On 1/5/2012 9:53 AM,GKern@xxxxxxxxxxxxxxxx wrote:
> I spent some time in the HMC probing various options but didn't find
> anything that resembled what I'm looking for.
>
> Where do I find the total amount of disk, and where can I find how
much
is
> allocated to each of my three partitions?
>
> Thanks, Jerry
>
> Gerald Kern - Information Technology
> Programming Supervisor
> IBM Certified RPG IV Developer
> Lotus Notes/Domino 8.0.1 Administrator
> The Toledo Clinic, Inc.
> 4235 Secor Road
> Toledo, OH 43623
> Phone 419-479-5535
> gkern@xxxxxxxxxxxxxxxx
>
--


------------------------------

message: 5
date: Thu, 05 Jan 2012 14:47:16 -0500
from: Rich Loeber <rich@xxxxxxxxx>
subject: AFP Overlay w/*SCS Spool File

Hello list.

Does a spool file have to be *AFPDS in order for an AFP overlay to print?
Seems to me that I recall being able to print an AFP overlay on an *SCS
spool file, but it is not working for me now on my V5R4 system. I have an
HP1320 connected through iSeries Access. I have host print transform
active, but I'm just getting the spool file output and the overlay is
being dropped. When I convert that same spool file to PDF (using our own
software) the overlay shows up in the PDF.

Rich Loeber - @richloeber
Kisco Information Systems
[1]http://www.kisco.com <http://www.kisco.com/>
SDG

References

Visible links
1. http://www.kisco.com/


------------------------------

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) digest list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



End of MIDRANGE-L Digest, Vol 11, Issue 15
******************************************



As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.