× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Rob, I believe that link you have is the one that I need or should be using,
thanks!!

On Wed, Aug 3, 2011 at 8:03 PM, Jack Kingsley <iseriesflorida@xxxxxxxxx>wrote:

Evan, respin is what version of lic levels your running.


On Wed, Aug 3, 2011 at 8:01 PM, Jack Kingsley <iseriesflorida@xxxxxxxxx>wrote:

Yes respins, Kirk can break down what the -C and -10 are, looks like
revision C?? Is there a website that says how you can migrate systems based
on RSE levels. From what I was told I had 3 options to choose from, I
choose the route that would take the least amount of time. Intermixing
power hardware and hmc controlled/non hmc controlled systems seems to be a
mix'n'match currently on if it will work or not.


On Wed, Aug 3, 2011 at 5:10 PM, Kirk Goins <kirkgoins@xxxxxxxxx> wrote:

RSE is a short way to say RS-610-E being Respin V6R1 rev E

Looks like from the Link posted earlier
http://www-947.ibm.com/systems/support/i/planning/resave/index.html

LIC respins are Alpha and SS1 are Numeric
V7R1 is currently at -C and -10
V6R1M1 is currently at -D and -10
V6R1M0 is currently at -G and -10


On Wed, Aug 3, 2011 at 1:19 PM, Evan Harris <auctionitis@xxxxxxxxx>
wrote:

I'm familiar with a re-spin, but what does a respin have that applying
cumes and groups doesn't bring to the table ?

Haven't heard the term RSE to describe a respin either - what does it
stand for ? Are you sure they are the same thing ?

On Thu, Aug 4, 2011 at 8:09 AM, <rob@xxxxxxxxx> wrote:
Respins or resaves of the OS. Certain hardware may require that the
LIC
be a certain level before installation. Oh, it still may be 7.1, but
it
may have more PTF's built into it.

Also some "technology refresh" ptf's are very comprehensive and IBM
sometimes generates a new respin to allow you to get an installation
done
without really having to step through some strange hoops.

Even with a new resave you should apply the latest cume and the
latest
applicable groups.

I always use the latest resave from:
http://www-947.ibm.com/systems/support/i/planning/resave/index.html




Rob Berendt
--
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com



--
Regards
Evan Harris
http://www.auctionitis.co.nz
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.