× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.




Alot of times the port number is the key thing that needs changed with a
new type of IP printer. We had good results when testing a Savin MFP
setup, but stuck with an Infoprint MFP (and are still stuck with the
horrible hardware service).




|------------>
| From: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|Paul Tykodi <ptykodi@xxxxxxxxx> |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| To: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|midrange-l@xxxxxxxxxxxx |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Date: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|06/03/2011 03:05 PM |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Subject: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|Re: Savin 9228 |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Sent by: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|midrange-l-bounces@xxxxxxxxxxxx |
>--------------------------------------------------------------------------------------------------------------------------------------------------|





Hi John,

The IBM web site
http://www-912.ibm.com/s_dir/slkbase.NSF/acf2ee1e9d64b16e8625680b00020389/82b3f6758038aef5862569c1007aaea7?OpenDocument


says to define it as either *RICOHMP5000 or *HP5SI. All drivers (PJL, SNMP,
IPP)
are supposed to be supported.

Where the same IP Address was used for the new device, the i/OS ARP cache
needs
to update itself so that it knows that the MAC Address for the Savin NIC
should
now be the hardware component hosting the IP Address.

If you can ping the Savin successfully from the System i, you should be
able to
get the device description to work as long as you have selected a
compatible
manufacturer type and model.

Best Regards,

/Paul
--
Paul Tykodi
Principal Consultant
TCS - Tykodi Consulting Services LLC


Tel/Fax: 603-343-1820
Mobile: 603-866-0712
E-mail: ptykodi@xxxxxxxxx
WWW: http://www.tykodi.com

date: Fri, 03 Jun 2011 09:05:42 -0500
from: jmmckee <jmmckee@xxxxxxxxxxxxxx>
subject: Savin 9228

Being out of loop is not fun.  I was told that a Xerox printer was to be
used
in this area.  Had a device description created, and it worked.  Then, it
didn't.  Found out that the

Xerox had been replaced with a Savin 9228.  Same IP address.

I did a Google search, and saw that the 9228 is supported.  What I don't
know
is whether it is supported at v5r4.  I have tried *NETSTNDRV, *HPPJLDRV,
*IBMSNMPDRV,
 *IBMPJLDRV, and *IBMIPPDRV.

When I try to start the writer, the writer ends immediately.  Job log
only says
"An internal program error has occurred.".

Do I have to change anything else when changing the driver program?  Is
this
device not supported at v5r4?  I wish we we current on the os.  But, in a
little
over a year,

this system gets scrapped.  Replaced with a network link to an unknown
system,
far away.

I have not tried remote output queue yet.  I had hoped to get away from
that.

I appreciate any thoughts.

John McKee
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


_____________________________________________________________________________

Scanned by IBM Email Security Management Services powered by MessageLabs.
For more information please visit
http://www-935.ibm.com/services/us/index.wss/offerfamily/iss/a1026954
_____________________________________________________________________________



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.