× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



thanks.

On Thu, Jan 20, 2011 at 3:55 PM, Kirk Goins <kirkgoins@xxxxxxxxx> wrote:

Just to make sure... With a proper Gateway address etc and you hav\ing VPN
access to the network, you won't have to use RDP once it is setup. Just
https://hmcport_address from your PC/laptop


On Thu, Jan 20, 2011 at 11:17 AM, Jack Kingsley <iseriesflorida@xxxxxxxxx
wrote:

Gotcha, well the big problem is having to us RDP. Ok, thanks.

On Thu, Jan 20, 2011 at 1:09 PM, Chris Bipes <
chris.bipes@xxxxxxxxxxxxxxx
wrote:

But if you have a system on the same network segment and can gain
access
to if via RDP or some other remote control software, you can add a
second IP address to the active NIC with in the 169 range. Then there
is no routing and you can gain access to ASMI from the local system
that
you are remote controlling. At this point you can configure the IP
address to a routable one and then delete the 169 added to the remote
server.

--
Chris Bipes
Director of Information Services
CrossCheck, Inc.


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Sent: Thursday, January 20, 2011 9:27 AM
To: Midrange Systems Technical Discussion
Subject: Re: ASMI Port ?

Well, I am finding on my network that the 169 is not routable??

My work around is to hard code to eth1 a workable static IP that I can
then
gain access to the system remotely via browser or HMC.

Today we do not utilize the ASMI within the network.

Was looking for alternative ways to do a couple of things.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.