× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



When I do a work object, NSLOOKUP show as a *cmd, but I don't know whet do with it.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Monday, September 27, 2010 1:00 PM
To: Midrange Systems Technical Discussion
Subject: RE: TCP/IP Trace

You could try NSLOOKUP instead of LSLOOKUP.

It's in the V5R4 infocenter.


Rob Berendt
--
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "Jeffry A. Kennedy" <jkennedy@xxxxxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 09/27/2010 01:51 PM
Subject: RE: TCP/IP Trace
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Trace rout shows the correct stuff going to my LPAR and get no response on
the Target Box. I couldn't find LSLOOKUP on my box (V5.4)

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [
mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Monday, September 27, 2010 12:05 PM
To: Midrange Systems Technical Discussion
Subject: RE: TCP/IP Trace

Command Library Text
TRACEROUTE QSYS Trace TCP/IP Route
NSLOOKUP QSYS Start NSLOOKUP Query

Use both of these.


Rob Berendt
--
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "Pete Massiello" <pmassiello-ml@xxxxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 09/27/2010 12:35 PM
Subject: RE: TCP/IP Trace
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Did they change the gateway address at the target location? Check to
insure
that (CFGTCP take option 2) the default gateway is pointing to the address
for that router (Network people will tell you that address).

Pete Massiello
iTech Solutions
http://www.itechsol.com

Add iTech Solutions on Facebook:
http://www.facebook.com/group.php?gid=126431824120
Add iTech Solutions on LinkedIn:
http://www.linkedin.com/groups?gid=2206093


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jeffry A. Kennedy
Sent: Monday, September 27, 2010 11:27 AM
To: 'Midrange Systems Technical Discussion'
Subject: TCP/IP Trace

My 2 iSeries stopped talking to each other on Friday. I can bing from from
my target box to the primary, but not the other way. I can get to the LPAR
on the target box. How do I do a trace from the iSeries ?
Our network people were doing stuff on the routers in the building where
the
target box is located. They are on different sub-nets.

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.