Rob,
I was thinking the same way, but I'm unsure of what information needs to
be added.
I looked at Change Network Setting, selected Name Servers tab.
This is what is currently showing...
X Use DHCP DNS Settings
DNS enabled
If I check off DNS enable it asks for
DNS Server Search Order and
Domain Suffix Search Order
So what do I add in these two fields?????
Rogers
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Thursday, August 13, 2009 7:13 AM
To: Midrange Systems Technical Discussion
Subject: RE: Power6 Service Alert Setup on HMC
Maybe. Try pinging by ip address also. You may have to tell the HMC
who serves your DNS.
Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From:
"Laine, Rogers" <rlaine@xxxxxxxxxxxxxxx>
To:
"Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Date:
08/12/2009 05:43 PM
Subject:
RE: Power6 Service Alert Setup on HMC
Sent by:
midrange-l-bounces@xxxxxxxxxxxx
Rob,
Tried the ping and it did not work. So I guess I need to setup a route
on the HMC for the dalarray.zzzzz.com, right?
Rogers
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, August 12, 2009 3:47 PM
To: Midrange Systems Technical Discussion
Subject: Re: Power6 Service Alert Setup on HMC
Did you try
HMC Management
Test Network Connectivity
to first ping dalarray.zzzzz.com
Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From:
"Laine, Rogers" <rlaine@xxxxxxxxxxxxxxx>
To:
<midrange-l@xxxxxxxxxxxx>
Date:
08/12/2009 04:34 PM
Subject:
Power6 Service Alert Setup on HMC
Sent by:
midrange-l-bounces@xxxxxxxxxxxx
I'm setting up the Service Alert on the HMC and running the TEST
function.
Below are the steps to verify the connection.
Where can I find information on the FAILED TO VERIFY LINK CONNECTION
message.
I'm thinking it is related to IP address not being defined to our
firewall that's causing the problem. Can you confirm this?
If a firewall is in place between the HMC and the Internet, it must
allow outgoing TCP/IP connections on port 443 from the Hardware
Management Console to your service provider. The IP addresses you must
allow depends on the protocol you chose on the Protocol to Internet tab.
If IPv4 (or IPv6 and IPv4) is selected, you must allow access to:
129.42.160.48 and 207.25.252.200 (allow Hardware Management Console
access to System Authentication Server (SAS))
129.42.160.49 and 207.25.252.204 (allow Hardware Management Console
access to IBM Service for North or South America)
129.42.160.50 and 207.25.252.205 (allow Hardware Management Console
access to IBM Service for all other regions) Note: You only need to
specify the IP addresses necessary to setup access to SAS and those
appropriate for your region.
Test beginning
Attempting to use a IPv4 connection
Waiting for connection availability
Request has been added to the queue.
Opening connection
HMC is attempting to activate a connection.
Utilizing the following resource: Internet
Attempting to connect through a configured proxy:
dalarray.zzzzz.com:8080
Attempting to connect through a configured proxy:
dalarray.zzzzz.com:8080
Failed to verify link connection.
Request has been cancelled.
Request has been removed from the queue.
Connection failed
Test completed unsuccessfully
************************************************
This E-Mail transmission (and/or the documents accompanying it)
may contain information belonging to the sender which is confidential,
privileged and/or exempt from disclosure under applicable law. The
information is intended only for the use of the individual(s) or entity
named above. If you are not the intended recipient, you are hereby
notified that any disclosure, copying, distribution or the taking of any
action in reliance on the contents of this information is strictly
prohibited. If you have received this E-Mail transmission in error,
please immediately notify us by return E-Mail or telephone to arrange
for return of its contents including any documents.
midrange.com
