RE: Determine size of load source -- MIDRANGE-L

× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.

Kirk... given your response, is this a 4, 8, 17, or 35 drive?

Michael

Work with Disk Status
S10A1587
07/16/09
14:56:09
Elapsed time: 00:00:00

Size % I/O Request Read Write Read Write
%
Unit Type (M) Used Rqs Size (K) Rqs Rqs (K) (K)
Busy
1 6718 13161 47.3 .0 .0 .0 .0 .0 .0
0
2 6718 13161 44.8 .0 .0 .0 .0 .0 .0
0

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Kirk Goins
Sent: Thursday, July 16, 2009 2:43 PM
To: Midrange Systems Technical Discussion
Subject: Re: Determine size of load source

Michael Smith wrote:

It has been over 15 years since I worked with hardware.

How do I determine the size of the 270's load source?

TIA

Michael Smith

Easiest is WRKDSKSTS and find unit #1. This will show the usable size of

the drive. If you are running Raid5 then you can look at the size and
round up to the next size drive. For example a drive between 2GB and 4GB

is probably 4GB and drive between 4 and 8GB is probably an 8GB and drive

size between 8GB and 17GB is a 17GB, 17GB and 35GB is probably a 35GB

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.