RE: Printing Portrait to A4 Paper

Thanks, Paul.

It turns out he was talking about it pulling from the wrong drawer. One is A4, another is 8.5x11.

Bonnie

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Paul Tykodi
Sent: Wednesday, March 11, 2009 8:20 AM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: Printing Portrait to A4 Paper


Hi Bonnie,

A4 paper in portrait orientation is 8.26 inches wide. Host Print Transform will normally assume 1/4 inch unprintable borders on both edges and therefore as you mention choosing 16.7 CPI and132 columns will cause two characters to not fit on the paper given the HPT defaults. If you can request 17 CPI, I believe that everything should fit OK.

Best Regards,

/Paul
-- Paul Tykodi
Principal Consultant
TCS - Tykodi Consulting Services LLC

Tel/Fax: 603-343-1820
Mobile: 603-866-0712
E-mail: ptykodi@xxxxxxxxx
WWW: http://www.tykodi.com

date: Tue, 10 Mar 2009 17:05:23 -0400
from: "Bonnie Lokenvitz"
subject: Printing Portrait to A4 Paper

I am working with a client who wants to print portrait to A4 paper on an
Xerox Work Center M128.
The forms are 132 characters.  Printer override is LPI = 6, CPI = 16.7
and PAGRTT = 0.

This looks good in the spool file but the last two characters are not
printing on the paper.

Is there something we can tweak for him to get full line?

The printer is defined as 3812 model 1.  Font ID 011 point 11.0.
MFRTYPMDL is *HP6. 
It has a USRDFMOBJ of object type *PSFCFG.  SYSDRVPGM is *HPPJLDRV.

Thank you,
Bonnie Lokenvitz