RE: Barcode printing questions

I experimented with it a few months ago, but determined that the 1d
would do the trick for what I needed.

I found the following DDS within an existing printfile:

BARCODE 42A 132BARCODE(PDF417 +
(*PDF417 5 *MIN 0))

I would make sure that you have all of your print PTFs loaded and if I
recall, you have to be somewhat current on your OS, possibly V5R3 if I
remember correctly.

Look up the infocenter for PDF417 and it should get you going.

Hope this helps.

Thanks.
James Salter
Systems Programmer
American Cast Iron Pipe Company
phone (205) 325-3033
fax (205) 307-3833


from: "Smith, Mike" <Mike_Smith@xxxxxxxxxxxxxxxx>
subject: RE: Barcode printing questions

James,
Have you had success printing two diminseional barcodes?
I have been exploring that myself recently and have been unable to get
the 2d's to work. I have printed upca and Code3of9 barcodes, just can't
get the pdf417 to work.

MIke

_________Confidentiality Notice_______________________
This e-mail and any files transmitted with it is
confidential and is intended solely for the use of
the individual(s) or entity(ies) to whom this e-mail
is addressed. If you are not the intended recipient
or the person responsible for delivering the e-mail
to the intended recipient, be advised that you have
received this e-mail in error, and that any use,
disclosure, dissemination, forwarding, printing,
retention or copying of this e-mail is strictly
prohibited. If you have received this e-mail in
error, please immediately return this e-mail to
the sender and delete the e-mail from your system.
Thank you.