×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
Turn it all off, then turn on printer before print server. If that does
not work, can you print directly attached to the printer? If so, the
printer server is dead, but you can try the printer server with another
printer to confirm. If you cannot print directly attached to the
printer, then it's interface died. Try resting to factory defaults and
start from scratch to configure the printer to work with the print
server.
First step is to determine if the printer server or the printer is at
fault.
Chris Bipes
Director of Information Services
CrossCheck, Inc.
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Burns, Bryan
Sent: Friday, December 19, 2008 8:19 AM
To: MIDRANGE-L@xxxxxxxxxxxx
Subject: Print server prints gibberish
I have an AXIS 540 print server connected to an IBM 6400 printer and
it's sending out gibberish. That is, test pages and configuration pages
from the print server itself print dollar signs and random letters with
some over-striking of characters. Spooled files print the same way.
Any suggestions on how to fix this? It used to work just fine.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact
[javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
