Re: New lpar getting B2006006 LP=005

From this PDF:

http://publib.boulder.ibm.com/infocenter/systems/topic/com.ibm.bladecenter.js21.doc/js21_pdguide.pdf


B2006006
During the startup of a partition, a system firmware error occurred
when the partition memory was being initialized; the startup will not
continue.
Go to "Firmware problem isolation" on page 110.

I know you are doing blades but maybe the error will help.

Bryan


On Thu, Sep 25, 2008 at 8:57 AM, <rob@xxxxxxxxx> wrote:

I am creating a new guested lpar. This is an i lpar hosted by another i
lpar. The hosting lpar is running 6.1. Haven't got the ability to load
lic on the guested lpar yet. This would be my third guested lpar. Two
were done on one M25. This is the first one on this M25.
Getting this error if I try to start the lpar from the hmc or from the
guesting lpar.

GDWEB2 is the guest. MAILTWO is the host.
Prc Mem
Name ID Status Units GB Active Profile Environment Reference
Code
GDIHQ2 2 Running 0.75 11 GDIHQ2profile i5/OS 00000000
GDISYS2 1 Running 0.25 5 GDISYS2profile i5/OS 00000000
GDWEB2 5 Error 0.25 0 GDWEB2 i5/OS B2006006
LP=005
HQLINUX2 4 Running 0.25 2 HQLINUX2 AIX or Linux SuSE Linux

MAILTWO 3 Running 0.5 9.75 MAILTWOprofile i5/OS 00000000

The server says:
Installed memory: 32768 MB
Deconfigured memory: 0 MB
Available memory: 384 MB
Configurable memory: 32768 MB
Memory region size: 128 MB
Current memory available for partition usage : 29824 MB
System firmware current memory: 2944 MB
Partition memory usagePartition name
Amount of memory (MB)
MAILTWO 9984
GDIHQ2 11264
GDISYS2 5120
HQLINUX2 2048
GDWEB2 0


GDWEB2 profile
Physical Memory
Installed memory (MB): 32768
Current memory available for partition usage (MB) : 29824
Minimum memory :
0 GB 512 MB
Desired memory :
1 GB 0 MB
Maximum memory :
32 GB 0 MB

Virtual adapters
Virtual SCSI adapter Adapter : 2
Type of adapter : Client
(checked) This adapter is required for partition activation.
Server partition : MAILTWO(3)
Server adapter ID : 2

Power controlling
ID Name
3 MAILTWO

Tagged IO
Load source Client SCSI Slot 2
Alternate restart device Client SCSI Slot 2

*********
Hosting partition
MAILTWO
*********
Virtual Adapters
Type Adapter ID Connecting Partition Connecting Adapter Required

Server SCSI 2 GDWEB2(5) 2 No


RTVCFGSRC
CRTNWSD NWSD(GDWEB2) RSRCNAME(CTL02) ONLINE(*NO) VRYWAIT(*NOWAIT) +
SHUTDTIMO(31) PARTITION('GDWEB2 -
') PTNNBR(*NONE) TEXT('LPAR GDWEB2 - INTERNOTES02') +
CODEPAGE(437) TYPE(*GUEST *OPSYS) MSGQ(*JOBLOG) +
POOL(*BASE) TCPPORTCFG(*NONE) TCPRTE(*NONE) +
TCPHOSTNAM(*NWSD) TCPDMNNAME(*SYS) TCPNAMSVR(('*SYS -
')) RSTDDEVRSC(*NONE) SRVOPT(*NONE) IPLSRC(*PANEL) +
IPLPARM(*NONE) PWRCTL(*YES)
ADDNWSSTGL NWSSTG(GDWEB201) NWSD(GDWEB2) ACCESS(*UPDATE) +
DYNAMIC(*YES) DRVSEQNBR(1)


Firmware
EC Number 01EL320
LIC Type Managed System Primary
Machine Type/Model/Serial Number 9408-M25*102EF8C
Installed Level 61
Activated Level 61
Accepted Level 61
Unactivated Deferred Level blank
Platform IPL Level 61
Update Control HMC


Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.