× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Rob

This is a very full explanation and it must have taken some time to type
it. I much appreciate it. It should go up on a wiki or somewhere where it
is easily found by those who, like me, need it.

I decided to go up to London yesterday evening to download the PTFs again,
but I am now having a PC problem - it copies the files to CD and just as it
finishes, decides that the CD is the wrong type. I will post the problem on
PC tech.


Many thanks again for this and your next post.

Rob Dixon

2008/9/19 <rob@xxxxxxxxx>

I did put a smiley face on that.

MF* PTFs: Licensed Internal Code (LIC) fixes. Traditionally the realm of
IBM hardware more than software. You see these in DSPPTF 5722999. Anyone
with a valid hardware maintenance contract can order these. (Although I
do not think that IBM unbundles hardware and software maintenance
anymore.) These ptf's used to almost always require an IPL to apply.
Although more and more are being applied without requiring an IPL as newer
releases of the os come out. If you are doing an abnormal IPL. (Like you
ran an ENDJOBABN or any of a number of other functions) then these will
still apply at the next IPL.
SI* PTFs: fixes for other LPPs (Licensed Program Products) like os,
iSeries access, etc. You see this in DSPPTF 5722SS1 or most of the rest
of your software resources. These normally require a valid software
maintenance contract to order. A vast majority of these can be applied
without an IPL. There may be special actions required, like kick all
users out of a certain function. If you are doing an abnormal IPL. (Like
you ran an ENDJOBABN or any of a number of other functions) then these
will NOT apply at the next IPL. You should perform two IPLs. The first
will reset the IPL from abnormal to normal. The second will apply the
PTFs.

CUME: A cumulative distribution of PTF's. Not all PTFs make it on a
cume. Generally if IBM feels that is HIPER it will make it on a cume.
Some examples of what may not make it include a ptf that only a small
selection of customers ever needed. IBM may be concerned that it wasn't
distributed to enough customers and there may be a negative side effect
that was unnoticed. Typically cumes only come out once a quarter or so.
Unless IBM ships a really nasty defective PTF on a cume then they may
announce a new cume right away.
You can see what cume you are running with WRKPTFGRP or DSPPTF 5722999 or
5761999 at V6. The highest TL* should be indicative of the cume. A
sample cume might be 08190. Which means it was generated on the 190th day
of 2008.
You can see what the latest cume is by
http://www-912.ibm.com/s_dir/sline003.nsf/ALLPSPBYREL
and drilling down for SF98### where ### is replaced by the appropriate
version, release and modification level. For example SF98530. Once you
read that you end up ordering SF99### (notice I replaced the 8 with a 9?).

Group PTF's: Groups of related PTF's. For instance there may be PTF's
for LIC, os and 5722TC1 (TCP/IP) itself all related to ensuring that
TCP/IP works fine. These will all be in a group for TCP/IP. Most people
do not have a need for all of these groups. For example, it's a rare shop
indeed that will be running all flavors of Websphere at the same time.
However there are some groups that all shops should strive to stay
somewhat current in, like Hiper. You can see what groups you have
currently installed on your system with WRKPTFGRP. Pay close attention to
the "level". You can see what groups are available at IBM with:
http://www-912.ibm.com/s_dir/sline003.NSF/GroupPTFs?OpenView&view=GroupPTFs
Groups may come as often as once a week. The hiper group often does.
Common groups, at V5R3, are:
SF99529: 530 Group Hiper
SF99528: 530 Group Security
SF99503: 530 DB2 UDB for iSeries
SF99346: 530 Print Group PTF for V5R3M0
SF99314: 530 TCP/IP Group PTF
SF99298: 530 Electronic Service Agent
SF99269: 530 Java
SF99139: 530 Performance Tools
SF99099: 530 IBM HTTP Server for iSeries
SF99185: 530 530 Backup Recovery Solutions
Less common ones are:
SF99322: 530 WebSphere App Server V6.1
SF99303: 530 WebSphere MQ for iSeries - v6.0
SF99301: 530 WebSphere App Server V6.0
SF99295: 530 WebSphere MQ for iSeries v5.3
SF99293: 530 WBI for WebSphere Portal V5.1
SF99290: 530 WebSphere App Server Adv Single Server Edition
SF99289: 530 WebSphere App Server Advanced Edition V4.0
SF99288: 530 WebSphere App Server ND V5.0
SF99287: 530 WebSphere App Server V5.0 (Base Edition)
SF99286: 530 WebSphere App Server ND V5.1
SF99285: 530 WebSphere App Server V5.1 (Base/Dev. Edition)
SF99284: 530 IBM Grid Toolbox V3 for OS/400
SF99282: 530 WebSphere Portal Express/Express Plus Service P
SF99275: 530 WebSphere App Server - Express V5.1
SF99272: 530 WebSphere App Server - Express V5.0
SF99173: 530 IBM Business Solutions

Service Packs: These apply only to iSeries Access. You can download and
install them directly on each PC, or you can install them on the i and
modify the Service properties in iSeries Access to occasionally check the
i, in a certain directory, and it will download whatever SP you loaded on
the i. Another common technique is to put them on a network server out
there and download from that. You can see these on your system with
DSPPTF 5722XW1.
For the latest SP's available check out:
http://www-03.ibm.com/systems/i/software/access/windows/casp.html

Recommended PTFs: These are PTF groups, and some individual PTF's that
may not be on a CUME or group.
You can see these at:
http://www-912.ibm.com/s_dir/slkbase.nsf/recommendedfixes

Keep in mind that support for V5R3 dies April 30, 2009. After that ptf
support withers. You can verify this at:

https://www-304.ibm.com/systems/support/i/planning/software/i5osschedule.html
And, if you want to see what new version of OS you can load on that
hardware you can see that at:
https://www-304.ibm.com/systems/support/i/planning/upgrade/osmapping.html

Someone care to stick this in the wiki?

Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Rob Dixon" <robertsdixon@xxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
09/19/2008 09:56 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
cc

Subject
Re: Prestart jobs QDASSINIT, QZAINIT, QZDASOINIT failing






Rob

I don't know whether this question was directed at me, but, if so,
certainly
not, and I am not sure why you would have thought that I was. Please be
patient with me - there are many aspects of the AS/400 iSeries that I
understand pretty well, but not everything - I work on a need to know
basis. Certainly on OS/400 and PTF installation I am woefully ignorant
because I haven't done it for so long. So what you, and the others who
are
totally familiar with these tasks, take for granted is often totally
foreign
to me and I don't always know what you are talking about. For instance, I
have no idea what MF* or SI* ptfs are. I was not sure that I understood
"applicable groups" although I did interpret this correclty.

What astonishes me is that you and the others are willing to spend your
time
being so helpful. I know that with your help and my perseverance I will
get
there. I really appreciate it.

Many thanks

Rob Dixon





2008/9/19 <rob@xxxxxxxxx>

Did I pi$$ you off or something, because I covered this in one of my
replies. :-)
Order the cume, and any applicable groups. The hiper group and db group
will automatically included in your cume. Granted if your cume is more
than a week or two old getting a newer hiper group is recommended.
See the available group ptf's at

http://www-912.ibm.com/s_dir/sline003.NSF/GroupPTFs?OpenView&view=GroupPTFs

See the available cume at:



http://www-912.ibm.com/s_dir/sline003.nsf/2d3aff1c6b4d6ce086256453000d971e/96d6779a030c40d686257158000fee74?OpenDocument


Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Rob Dixon" <robertsdixon@xxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
09/19/2008 04:16 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
cc

Subject
Re: Prestart jobs QDASSINIT, QZAINIT, QZDASOINIT failing






Many thanks to everyone for their help.

I have checked the PTFs and can find nothing obviously worng, nothing
that
needs applying, done countless IPLs, etc.

I feel that since V5R3 is a mature release and the problems that I have
seem
so basic, that it must be something to do with my installation, so I am
going to reinstall from scratch, download the PTFs again, etc. Because
I
have other things to do, this will take me a little while. Perhaps
unnecessary but it may save me time in the long run. I am going to use
a
different source media for OS/400.

To ensure that I apply the correct PTFs, do I just need the cume pack or
should I also download the PTFs for individual products? I did the
whole
lot last time. I did not use the PTF cds.

Many thanks

Rob Dixon

2008/9/18 Evan Harris <spanner@xxxxxxxxxx>

Rob

Since you have PTF issues that is really the place to start -
everything
else is slowing you down from fixing the PTF's. Once they are right
you
can
try some of the other suggestions if you still need to.

Apologies if you answered some of this already:

If you do a DSPPTF, do you have products with individual PTF's that
show
as
applied/installed, action required or loaded ?

If you have any with action required you may be able to get away with
IPL's
again - if you have already done this it would be worth a crack.

Otherwise is you have PTF's showing as loaded you may have loaded and
not
applied the PTF's in which case you need to run the APYPTF command and
the
IPL to apply them.

What process did you use to load and apply the cume package ? And it
is
definitely a cume package, not just PTF CD's right ?

Regards
Evan Harris

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob Dixon
Sent: Friday, 19 September 2008 8:31 a.m.
To: Midrange Systems Technical Discussion
Subject: Re: Prestart jobs QDASSINIT, QZAINIT, QZDASOINIT failing

Scott

I have done this and retried but no change to information.

Many thanks

Rob


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




--
Rob Dixon

www.erros.co.uk
www.boarstall.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




--
Rob Dixon

www.erros.co.uk
www.boarstall.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.