We have had AnyNet configured over our wired network connecting on
several of our systems for years. Those systems (v5r3) are now
partitions on the same box. Now I configured new setups to have AnyNet
run over the LPAR Virtual LAN (VLAN). I am having no problem with new
partitions that never had the old wired setups configured, but the old
ones do not work. I have been working with IBM Support Line and traces
show that the routing is getting "lost". It seems that the send goes
out correctly but the return "sees" the old network and gets "confused".
With a STRPASTHR I'm able to qualify the route by using a 2nd parm
(LCLLOCNAME) but I want to use the SAVRSTLIB and SAVRSTOBJ commands and
they don't have parms to qualify the routing.

Has anyone been able to get a VLAN to work with the SAVRST... commands
after already having a wired AnyNet configured to the same LPAR?

Douglas Hart

This e-mail and any files transmitted with it may be proprietary and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the sender. Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of ITT Corporation. The recipient should check this e-mail and any attachments for the presence of viruses. ITT accepts no liability for any damage caused by any virus transmitted by this e-mail.

This thread ...


Return to Archive home page | Return to MIDRANGE.COM home page