RE: QNTC not working

We had many, many problems when we went to V5R4. It is because QDLS is not and cannot be multi-threaded. When you start a job that uses any of the other files systems, a prestart job QZLSFILET is started in QSERVER. This is the threaded job. I believe ... If you have this job running with your profile in it and then try to connect to QDLS it will not work. The QDLS job must be started first and must be QZLSFILE.

QZLSFILE MKERN4 PJ .0 DEQW <<--- this is me in QDLS
QZLSFILET QUSER PJ .0 TIMW <<--- this is other folks in other file systems

Are you trying to drill down or map a drive to it? Do you have an entry for the user in the directory (WRKDIRE). Has the user profile been disabled for Windows Network Neighborhood (a message would show up in QSYSOPR)?

Thanks!
Mary

¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«
Mary Kern
Director of Information Services
University of Toledo Foundation
2801 W Bancroft St Mail Stop 319, Toledo, OH 43606
Voice: (419) 530-5611 (800) 640-0147 Fax: 419-530-2895
Email: Mary.kern4@xxxxxxxxxxx
"Three things in human life are important. The first is to be kind.
The second is to be kind. The third is to be kind. -- Henry James
¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Smith, Mike
Sent: Thursday, October 11, 2007 8:44 AM
To: Midrange Systems Technical Discussion
Subject: QNTC not working

I have been trying to get QNTC working for the last couple of days- with
no luck. I have read everything I can find, but I'm getting nowhere
fast.

I have verified with my network people that the Domain name and WINS
servers are set correctly on NETSERVER setup.
I have changed environment variables
QIBM_ZLC_NO_BROWSE ''
QZLC_SERVERLIST '2'

I have the same profile/pwd on the servers and on the ISERIES.

I have performed a MKDIR pointing to one of the win servers- which
works, however I still cannot see anything in the server.

I am on V5R4 and have verified that SMB messinging has been turned off
on the WIN2003 servers also.

What else can I check?
Is there any logging anywhere to indicate the problem?- I cannot find
any.

Ps, at somepoint in the past, I had this working(don't remember how long
ago though)

thanks
Michael Smith