× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Thanks for the great info. I just went to 6.1.2, I was a little nervous
about going to ver7.

Lyle J. Hart Jr.
Manager Computer Operations
Nuvell Financial Services Corp.
501.821.8275
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Thursday, August 09, 2007 8:17 AM
To: Midrange Systems Technical Discussion
Subject: New version of HMC.

Loaded 7.3.1.0 of HMC (after getting my firmware up to an appropriate
level).
Loaded on MH01015, MH01030, MH01041 on the HMC.
The interface is very nice. Only those used to the old version, and
could
click on the right thing blindfolded, might complain.
Some small quirks like trying to start the 5250 session was a bit, well,

quirky, but I got it done.
Can't really duplicate the
ServerI
Partition1
Partition2
Partition3
ServerII
PartitionA
PartitionB
screen. I could get a group screen that listed
Partition1
Partition2
Partition3
PartitionA
PartitionB

Remote access to the HMC was incredibly easy to set up (once I found the

documentation). I went into: HMC Management, Administration, Remote
Operation and changed it from disabled to enabled. Then I used a
browser
to go to https://myhmc Remember, that is httpS, not just http. First
time I had to install a certificate. Now I get the full GUI easily.
Other
than installing the certificate (when prompted), and allowing popups for

this site, there was nothing to configure or install on the PC.

I don't have access to 5250 sessions started on the HMC via this method.
I
still had to use iSeries Access for Windows and change:
Communication, Configure, System Name
Communication, Configure, Properties, Use default User Id, prompt as
needed
Communication, Configure, Properties, User ID Q#HMC
Communication, Configure, Properties, Security, Not Secured
Communication, Configure, Type of emulation, Display, leave size at
24x80.
Communication, Configure, Port number, 2300, not the default of 23.
Make sure when you start 5250 sessions on the HMC you make them shared
and
not dedicated.

Rob Berendt

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.