× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Larry

The pack for the 2740 - which is what we have on the 170 - is a NiCad - not the
NiMH found on the 2763 we have on a 270. As far as the NiMH, I took the old
pack to a Batteries Plus here - they found nothing in the DB based on the Sanyo
part number on it - They also did not know why the 3rd lead - I suspect
something for the temperature, since the system will shorten the estimated life
if the ambient temp is high. This particular BattPlus seemed clueless.

So we might be in a different world - it IS an old 2740 card - what do we need
for that? The IBM part number is 44L0305.

Thanks
Vern (on Richard's behalf)
-------------- Original message --------------
From: Larry Bolhuis <lbolhuis@xxxxxxxxxx>

Yep. The 'three lead' ones are NiMh type but still three batteries. Not
sure what lead three is for but I'm guessing it wouldn't be there if it
wasn't needed. At the very least it prevents you from putting an old
2740 battery on a 4778! At the local batteries plus I can call them and
get a 'FC #4778" (That's what I had them put into their DB for me.) and
they'll build it up.

- Larry

Pete Helgren wrote:
Like Larry said. Go to Batteries Plus. In my case the cache battery
for our 270 had a three lead connector, unlike the batteries for a
cordless phone, so they built one in about 5 minutes. So, shutting down
the system and walking the battery down to the store is a good idea. I
have also gone to a local battery store and they have built me one as
well.

$14.39 if I recall correctly.....

Pete


Larry Bolhuis wrote:

For that card you can go to Batteries Plus and pick one up off the rack.
It's simply a three cell NiCd battery for the handset of many cordless
phones. Bring the battery along though because they make them with the +
and - terminals both ways and you'd hate to get it wrong!

Mucho Cheapo!

- Larry


--

Larry Bolhuis IBM Certified Advanced Technical Expert
- System i Solutions
Vice President IBM Certified Systems Expert:
Arbor Solutions, Inc. System i Technical Design and
Implementation V5R4
1345 Monroe NW Suite 259 eServer i5 iSeries LPAR Technical
Solutions, V5R3
Grand Rapids, MI 49505 IBM Certified Specialist
System i Integration with BladeCenter
and System x V1
(616) 451-2500 System i IT Simplification: Linux
Technical V5R4
(616) 451-2571 - Fax iSeries System Administrator for
OS/400 V5R3
(616) 260-4746 - Cell

If you can read this, thank a teacher....and since it's in English,
thank a soldier.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.