× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Hi John,

I just tried your change for changing the FIDELITY on the PRTF. Our PRTFs
were set to *CONTENT and I changed it to *ABSOLUTE. Bad luck, same thing.
No print.



Thanx,

Nick



Nick Radich
Sr. Programmer/Analyst
EPC Molding, Inc.
Direct (320) 679-6683
Toll free (800) 388-2155 ext. 6683
Fax (320) 679-4516
nick_radich@xxxxxxxxxxxxxx



"John Candidi" <jacandidi@xxxxxxxxxxxxxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
06/04/07 02:53 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Subject
RE: Printer problems with overlays






IIRC, had that problem once on an INFOPRINT40 and we changed the form
content of the print from *content to *Absolute or the other way around.
It
may be completely out of line but I think it actually worked. I could be
way
off base because it was a while ago

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Nick_Radich@xxxxxxxxxxxxxx
Sent: Monday, June 04, 2007 3:45 PM
To: Midrange Systems Technical Discussion
Subject: Re: Printer problems with overlays

Hi Wayne,

Thanx for the suggestion, but I just tried that and still same result.
Printer Ends and no printout.



Thanx,

Nick



Nick Radich
Sr. Programmer/Analyst
EPC Molding, Inc.
Direct (320) 679-6683
Toll free (800) 388-2155 ext. 6683
Fax (320) 679-4516
nick_radich@xxxxxxxxxxxxxx



Wayne McAlpine <wayne.mcalpine@xxxxxxxxxxxxxxxxx>
Sent by: midrange-l-bounces+nick_radich=epcmolding.com@xxxxxxxxxxxx
06/04/07 02:38 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
midrange-l@xxxxxxxxxxxx
cc

Subject
Re: Printer problems with overlays






I believe most of the lan-attached IBM printers use port 2501, not 9100
like the HP's.

Nick_Radich@xxxxxxxxxxxxxx wrote:
Hi Everyone,

I have just recently replaced an HP LaserJet 2100TN with an IBM
InfoPrint
21 printer in our Shipping Dept. One of the main things printed on this


printer is the Bill Of Lading. This is a PRTF with an overlay in it.

It worked fine in the past with the HP printer, but now with the
InfoPrint
21 it will "sometimes (5%)" print, and other times, "most of the
time(95%)", the Printer will go to status "END". I have to stop/start
the Print Writer a few times to get it to work again.

I also have Sharp ARM 350 Copier/Printer set up there with the same
exact
config, and it prints with no problems. That is where I am printing the


BOLs now.

Normal PRTFs print OK.

I have it configured as:

DEVD MORSHPLAS1
OPTION *BASIC
*PRT

DEVCLS *LAN
TYPE 3812
MODEL 1
LANATTACH *IP
PORT 9100
ATTACH *DIRECT
ONLINE *YES
FONT
011
*NONE
FORMFEED *AUTOCUT
SEPDRAWER *FILE
SEPPGM *NONE
PRTERRMSG *INFO
MSGQ *CTLD
QSYSOPR
QSYS
ACTTMR 170
INACTTMR *SEC15
LINESPEED 19200
WORDLEN 8
PARITY *NONE
STOPBITS 1
TRANSFORM *YES
MFRTYPMDL *HP5
PPRSRC1 *LETTER
PPRSRC2 *LETTER
ENVELOPE *NUMBER10
ASCII899 *NO
IMGCFG *NONE
CHRID *SYSVAL
RMTLOCNAME
192.168.10.17
WSCST *NONE
USRDFNOBJ *NONE
*NONE
USRDTATFM *NONE
SYSDRVPGM *HPPJLDRV

MORSHPLAS1
QSPLJOB
733007
TEXT Shipping Laser - IBM InfoPrint



This is the same config as I had for the HP.

Also, I tried setting it up as an *IPDS printer instead of a 3812. The
printer never "ended", but the overlay moved up about 3 lines, so I
could
not go that route.

We are at V4R5. :-(

Any help would be greatly appreciatted.



Thanx,

Nick



Nick Radich
Sr. Programmer/Analyst
EPC Molding, Inc.
Direct (320) 679-6683
Toll free (800) 388-2155 ext. 6683
Fax (320) 679-4516
nick_radich@xxxxxxxxxxxxxx

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.