You may have a head mis alignment on one machine. It can read/write it's own tapes but may not be able to read tapes from other machines. I would see if both machines can read an IBM tape, the same IBM tape just to eliminate a hardware problem. Do you have an old diagnostics tape? Christopher Bipes Information Services Director CrossCheck, Inc. -----Original Message----- From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Brian Crooks Sent: Wednesday, November 22, 2006 12:25 PM To: 'Midrange Systems Technical Discussion' Subject: RE: Tape drive problem They are running 36 apps using sys/36 machines, not under the 36 environment. As to the commands used, they were SAVELIBR to save and RESTLIBR to restore. I have a number of other sites using the same software on the same box and have never run into this problem.
This mailing list archive is Copyright 1997-2015 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact