× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Do a CHGSRVCNT and page down, change the media to CD-ROM, see if that
helps.

Or CHGSRVCNT MEDPTF(*CDROM) if you don't want to check your other info. 


--
Justin C. Haase - iSeries System Engineer
IBM Certified Systems Expert - System i
Kingland Systems Corporation

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Norbut, Jim
Sent: Thursday, November 16, 2006 2:24 PM
To: Midrange Systems Technical Discussion
Subject: CPF8C27

When trying to do a WRKPRB and send a problem getting the following :
 
 
Message ID . . . . . . :   CPF8C27       Severity . . . . . . . :   10

Message type . . . . . :   Information

Date sent  . . . . . . :   11/16/06      Time sent  . . . . . . :
14:16:51   
 

Message . . . . :   Alternate load device not found.

Cause . . . . . :   Your system is not set up correctly to send requests
to    
  IBM Service. Information indicating the alternate load device
type/model =   
  0000/000 will be stored in the problem log.

Recovery  . . . :   Contact your hardware service representative and
have the
  alternate device moved to the correct position, and try the request
again.   
Technical description . . . . . . . . :   The alternate load device is
not in
  the position required for an initial program load (IPL).  The
alternate load
  device must be on the disk/tape I/O Processor at Bus position 0, at
Card 1,
  Board 0.

 
 
????
 
I have a 595 expansion unit for this LPAR
 
from left to right
 
C01      2844 Card
C02      2780 Card
C03      5780 Card
C04      5706 Card
C05      <empty>
C06      2844 Card
C07      5736 Card
C08      <empty>
 
 
 
 
-----------------------------------
Jim Norbut
Systems Administrator
Grubb & Ellis Company
500 West Monroe
Chicago, IL 60661
(312) 698-5620 

 
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.



CONFIDENTIALITY NOTICE:  This e-mail communication, including attachments, is 
covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is 
confidential, and may be legally privileged.  If you are not the intended 
recipient or believe you received this communication in error, please reply to 
the sender indicating that fact and delete the copy you received.  In addition, 
retention, dissemination, distribution, copying, or otherwise use of the 
information contained in this communication is strictly prohibited.  Thank you.


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.