And if your system was configured for HMC it would say HMC = 0 on the control panel right now - and it doesn't, so you're clear! Agreed on the 65 21 gig - have fun and do it QUICKLY... I think you get 45 seconds between each press of the "enter" button. -- Justin C. Haase - iSeries System Engineer IBM Certified Systems Expert - System i Kingland Systems Corporation -----Original Message----- From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Stefan Tageson Sent: Monday, November 13, 2006 3:00 PM To: Midrange Systems Technical Discussion Subject: RE: System i5 first boot midrange-l-bounces@xxxxxxxxxxxx wrote on 2006-11-13 21:45:01:
Does it sound like my system was sent to be configured with an HMC?
There is a procedure in InfoCenter (search for console service functions) that you can use to identify how your server is set up. The procedure is based on using the operator panel functions 65 and 21 in various combinations. You can also use this procedure to change the console type if necessary. Good Luck! Regards Stefan Tageson -- This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/midrange-l or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l. CONFIDENTIALITY NOTICE: This e-mail communication, including attachments, is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential, and may be legally privileged. If you are not the intended recipient or believe you received this communication in error, please reply to the sender indicating that fact and delete the copy you received. In addition, retention, dissemination, distribution, copying, or otherwise use of the information contained in this communication is strictly prohibited. Thank you.