Re: Problems sending email from AS/400

try this one
http://www.mail-archive.com/forum.help400@combios.es/msg01259.html

jmmckee@xxxxxxxxxxxxxx 9/5/2006 5:00:31 PM >>>

I have done
ENDMSF followed by
STRMSF MSGOPT(*CLEAR)

Very next mail attempt produces the error.  Seems like a configuration
issue,
but I don't know where to look.

John McKee

Quoting Mike Cunningham <MCUNNING@xxxxxxx>:

we get this error frequently but had it before and after our 820 to

520

migration. We usually get them with one of our offices runs a large
e-mail send and there are invalid addresses in our database. Not

just

undeliverable but malformed (e.g.
"mary@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" - yes this was an actualy
address entered by one of our students) we usually will purge all

SMTP

mail when we see a lot of them, usually on system startup. But these

do

not appear to stop other mail from working

jmmckee@xxxxxxxxxxxxxx 9/5/2006 4:36:13 PM >>>

We recently (three weeks ago) upgraded from an 820 to a 520.  Ever
since that
time, email has not worked.

Specifically, the following message is sent to QSYSOPR:

                       Additional Message Information

Message ID . . . . . . :   CPFAF98       Severity . . . . . . . :  

00

Message type . . . . . :   Information
Date sent  . . . . . . :   09/05/06      Time sent  . . . . . . :
15:25:26

Message . . . . :   Job 053796/QMSF/QMSF stopped processing MSF
message.
Cause . . . . . :   Exit point program QTMSFWD in library QTCP for

exit

point
 QIBM_QZMFMSF_MSG_FWD has detected a condition with message ID
 10F634C0609051525260000000008. The message indicates that

processing

should
 be ended. The MSF message will be processed again the next time the
Start
 Mail Server Framework (STRMSF) command is used.
Recovery  . . . :   Determine why the exit point program indicated
that
 processing for a message is to be ended. There may be messages

listed

in the
 job log that caused the exit point program to fail. Correct the

error

and
 use the End Mail Server Framework (ENDMSF) command to end all MSF
jobs. Then
 use the Start Mail Server Framework (STRMSF) command to start
message
 processing again.

Bottom
Press Enter to continue.



This is a section for the MSF joblog:

                        Additional Message Information

Message ID . . . . . . :   TCP5101       Severity . . . . . . . :  

30

Message type . . . . . :   Diagnostic
Date sent  . . . . . . :   09/05/06      Time sent  . . . . . . :
15:25:26

Message . . . . :   Integrated File System file open failed on file
  JMCKEE20060905152730
Cause . . . . . :   The RTCP function requires the use of an

Integrated

File
  System file JMCKEE20060905152730. The errno return from the call

is

3025.
Either this file is missing, locked or damaged on the system and

cannot

be
  used at this time.
Recovery  . . . :   Stop Mail System Framework ie. "ENDMSF" and
restart
  "STRMSF".

Check earlier entries in Job Log for possible reasons for this
failure.

If system storage problem:

More...
Press Enter to continue.

F3=Exit   F6=Print   F9=Display message details   F12=Cancel
F21=Select assistance level


In this case, the file named was located in /home/BSYPGMR4.

Other files were left abandoned in / as well as /tmp


Any suggestions as to where to look for the cause and how to fix?

Thank you

John McKee

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)

mailing

list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.