× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Sounds more like a data integrity problem to me. Are you sure you're not
sending invalid data (i.e., something below hex 40) to a display field?

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of John Wallroff
Sent: Monday, April 24, 2006 3:01 PM
To: Midrange Systems Technical Discussion
Subject: Negative response code... RNX1251

I have a very frustrating problem.  I am working on a display file that
we have had for several years.  This display file is now coming up with
these errors when it is displayed, another display file is display and
this display file is displayed for a 2nd time...

 

Data sent to device FLJOHN1 not valid.  Negative response code is      

  10050126.                                                            

Permanent I/O error occurred in file IABS423.                          

Function check. RNX1251 unmonitored by IABR423 at statement 0000000797,

  instruction X'0000'.                                                 

Permanent I/O error occurred in file IABS423 (C G D F).                

Permanent I/O error occurred in file IABS423 (C G D F).                

 

We have 2 partitions on our iSeries, a Dev side and a Production side.
I was making some changes to this display file on the Dev Box and I
started getting this error while testing the changes.  Well, long story
short, I moved the old source files from Production onto the Dev box to
try to figure out where the problem really was.  I compiled the original
display file and it's came up with the same error when I ran it.  The
production box was working so to test if it was some type of
configuration difference between the Production box and the Development
box I simply recompiled the existing source on the Production box, now
it's coming up with the error.  Keep in mind, nothing has changed on the
production box other then an old existing Display file was recompiled.

 

Do any of you out there have any idea what the heck is going on?  Is
there some kind of PTF that I'm missing that addresses this?  This
Display file has been around and has been used for a long time.  I
personally made a change to it 4 years ago and it's always worked.  On
the Production box nothing has changed other then recompiling the source
so I don't think there is a problem with the source or RPGLE program
that runs it.  My gut feeling is that there is a system issue.  Doing a
Google search on the error RNX1251 even brought up an issue with V5R2
and this error and showed a PTF.  We are on V5R3 and are pretty up to
date other then I've yet to load the latest CUM set.  I plan on doing
that this week on our Dev box and if everything looks good on the
Production box this weekend.

 

Thank you very much for your help in advanced. 


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.