× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Looks like you'll need to start looking here:

DSPDSTLOG

Check both sending & receiving machines.

HTH

Mike

>

>no. under 70%. so that doesn't seem the problem. anything else i can
check?
>
>> -----Original Message-----
>> From: midrange-l-bounces@xxxxxxxxxxxx 
>> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Lapeyre,
Francis
>> Sent: Monday, January 30, 2006 3:40 PM
>> To: 'Midrange Systems Technical Discussion'
>> Subject: RE: SNDNETSPLF not working
>> 
>> 84% should be OK - is the other machine also under 90%? 
>> 
>> -----Original Message-----
>> From: midrange-l-bounces@xxxxxxxxxxxx
>> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Knezevic,
Mihael
>> Sent: Monday, January 30, 2006 8:12 AM
>> To: Midrange Systems Technical Discussion
>> Subject: RE: SNDNETSPLF not working
>> 
>> it is 84%. is 90% this a hard limit for not sendig spooled 
>> files or can it
>> be configured somewhere? 
>> 
>> > -----Original Message-----
>> > From: midrange-l-bounces@xxxxxxxxxxxx 
>> > [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of 
>> Lapeyre, Francis
>> > Sent: Monday, January 30, 2006 3:06 PM
>> > To: 'Midrange Systems Technical Discussion'
>> > Subject: RE: SNDNETSPLF not working
>> > 
>> > Is your disk usage approaching 90% on either machine? SNADS 
>> will stop 
>> > sending spool files when that happens.
>> > 
>> > Francis Lapeyre
>> > IS Dept. Programmer/Analyst
>> > Stewart Enterprises, Inc.
>> > E-mail: flapeyre@xxxxxxxx
>> > 
>> > 
>> > 
>> > -----Original Message-----
>> > From: midrange-l-bounces@xxxxxxxxxxxx
>> > [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of 
>> Knezevic, Mihael
>> > Sent: Monday, January 30, 2006 7:04 AM
>> > To: Midrange Systems Technical Discussion
>> > Subject: SNDNETSPLF not working
>> > 
>> > hi,
>> > 
>> > i got a little problem here. we used to transfer spooled files from

>>
>>> work anymore 
>> > and i got no clue why.
>> > 
>> > i verified with the command wrkdstq that the spooled file 
>> is going out 
>> > from the system but i don't know how to check if it is 
>> going in on the 
>> > other system.
>> > 
>> > anybody an idea?
>> > 
>> > we are on v5r2.
>> > 
>> > thx
>> > 
>> > mk
>> > 
>> > --


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.