520 Attention Light was:UPS attachment problem on i5 520

About 2 weeks ago I installed a new 520 for a client. It was one of those 
where Manufacturing had left it set for HMC=0 even though it was a Twinax 
Console. I called support and they walked me through resetting thing via 
ASMI and finally had me pull the FSP NVRAM Battery to flush things there. 

Anyway the Attention Light was on from the first power up. So I went in 
via SST to turn it off. The F6 option was there, I took it and then the 
F10 to Confirm. The screen comes back with the F6 still there and the 
light still on. So after a couple more retries to check my sanity and 
keystrokes no change. Called support and they tell me there was a recent 
PMR regarding not getting the F6 to Acknowledge the errors.. Well I guess 
the latest firmware fixed it good...

Still waiting on a fix from IBM... The Attention Light worked just fine 
for 15+ years 
_____________________
Kirk Goins CCNA
Systems Engineer, Manage Inc.
IBM Certified i5 Solution Sales
IBM Certified iSeries Solutions Expert
IBM Certified Designing IBM e-business Solutions 
Office 503-353-1721 x106 Cell 503-577-9519
kirkg@xxxxxxxxxxxxx      www.manageinc.com

There are 10 types of people in the world:
Those that understand binary, and those that don't.



"Jeff Crosby" <jlcrosby@xxxxxxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
11/17/2005 08:02 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Subject
RE: UPS attachment problem on i5 520







> but that extremely bright yellow light will not go out.  I 
> went into SST and cleared all the errors, reset any flags but 
> the light is still glowing brightly.  Any one know how to 
> turn it off... Without cutting it out?

Here's the entire PMR I had opened with IBM on this issue.  Please note 
that
this demonstrates that I can be a sarcastic SOB <g>