× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.







Good info... things have defintely changed with this on the i5's.  I
believe the current firmware update is more like SF220_75... so you may
want to go after that one instead, but I think SF220_51 worked on our
development box for the UPS issue.


                                                                           
             "Jan Rockstedt"                                               
             <jan.rockstedt@av                                             
             inova.se>                                                  To 
             Sent by:                  "Midrange Systems Technical         
             midrange-l-bounce         Discussion"                         
             s@xxxxxxxxxxxx            <midrange-l@xxxxxxxxxxxx>           
                                                                        cc 
                                                                           
             03/02/2005 08:55                                      Subject 
             AM                        SV: Port for UPS on i520            
                                                                           
                                                                           
             Please respond to                                             
             Midrange Systems                                              
                 Technical                                                 
                Discussion                                                 
             <midrange-l@midra                                             
                 nge.com>                                                  
                                                                           
                                                                           




Thanks Chad!

I found this on IBM web.
http://www-912.ibm.com/s_dir/slkbase.nsf/1ac66549a21402188625680b0002037e/34af6804d80c8a8586256ef1006c9d12?OpenDocument&Highlight=0,ups


Document Title
Connecting a UPS to an IBM® eServer(tm) i5 System

Document Description
Required fix: Model 520 systems must have fix level SF220_51 or higher.

Required cable: Before connecting a UPS to your model 520 or model 570 IBM®
eServer(tm) i5 system, you will need a UPS cable converter - feature code
1827 - part number 97P4299. (At some point, UPS manufacturers may provide
the converter cables with the UPS or they may provide a UPS sensing cable
that will not need the converter, but for now FC1827 can be ordered from
IBM.)

Referring to the following diagram, connect side B of the serial to UPS
converter cable (with the external threads) to the top port on the back of
your system. Connect side A of the serial to UPS converter cable (with the
internal threads) to the vendor supplied UPS cable.





For the model 570 and rack mounted model 520: Connect the UPS sensing cable
to the top serial port (the serial ports are located on the back of the
system unit to the far left).

For the desktop model 520: Connect the UPS cable to the right serial port
(the serial ports are located on the back of the system unit at the very
top).



Regards
Jan Rockstedt

Avinova AB


-----Ursprungligt meddelande-----
Från: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] För ChadB@xxxxxxxxxxxxxxxxxxxx
Skickat: den 2 mars 2005 14:37
Till: Midrange Systems Technical Discussion
Ämne: Re: Port for UPS on i520






There are two serial ports on the rear of the 520.  We have a rack mounted
model and it's the top serial port, which is labeled 'T2'.  I'm not sure
how they're oriented on a standalone model.  Be aware that some PTFs and/or
firmware updates may be required to get the machine's firmware up to the
correct level so that it will detect the cable.  On one of our 520s we
needed to power down the system after updating the firmware and actually
remove power to the 520 for several minutes in order to get the firmware
updated completely before the cable's presence would register (per IBM's
suggestion after the cable still wouldn't register).

Also, there is a short 'conversion' cable from IBM that you will need with
the 520... it attaches to the T2 serial port and then to your UPS cable.

IBM's hardware support group is getting pretty familiar with these items
now, but the first few calls took a while! ;)



             "Jan Rockstedt"
             <jan.rockstedt@av
             inova.se>                                                  To
             Sent by:                  "Midrange Systems Technical
             midrange-l-bounce         Discussion"
             s@xxxxxxxxxxxx            <midrange-l@xxxxxxxxxxxx>
                                                                        cc

             03/02/2005 05:15                                      Subject
             AM                        Port for UPS on i520


             Please respond to
             Midrange Systems
                 Technical
                Discussion
             <midrange-l@midra
                 nge.com>






Hi!

I have a new i520.
Where do i connect my UPS cable on a i520?
I can't find any J14 port.

Regards Jan Rockstedt

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.


_____________________________________________________________________________


Scanned by IBM Email Security Management Services powered by MessageLabs.
For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________



ForwardSourceID:NT0001AA22

_____________________________________________________________________________

Scanned by IBM Email Security Management Services powered by MessageLabs.
For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


_____________________________________________________________________________

Scanned by IBM Email Security Management Services powered by MessageLabs.
For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________


ForwardSourceID:NT0001AA5A

_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For 
more information please visit http://www.ers.ibm.com
_____________________________________________________________________________

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.