× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



It's not just the 520 that cries wolf - it's all 5xx i5's.  Usually any
type of white message in QSYSOPR will tag it in addition to the normal
stuff.  So - when the ECS line dies for some reason?  System attention.
There are many more, and it's really hard to quantify what severity or
message type will flag it.  

Rumor has it that the pSeries boxes have always been like that - the
attention light was on more than it was off.  Basically because it's a
latching error type of thing - unlike iSeries and AS/400 of old where
when you fixed the problem the light turned off.

Sort of a mixed blessing, really.  We've been used to the attention
light being horrible, horrible news in the past - now it's starting to
seem like a catch-all for both hardware and some software problems.  

With the problem report search function in HMC, I'd be interested if you
could do more searches for the SRCs starting with 1100 and 1000 and see
if/when that other power supply actually did die.  I think you're on to
something with the theory the secondary may have died some other time.
I also would be suspicious of that UPS making it happen.

My .02

Justin C. Haase - iSeries System Administrator
IBM Certified Systems Expert - eServer i5
Kingland Systems Corporation
email - justin.haase@xxxxxxxxxxxx


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Monday, February 28, 2005 2:26 PM
To: Midrange Systems Technical Discussion
Subject: Re: 520 down.

Both power supplies were fried.  Got one replaced, second one is coming.

520 is back up and running.  The 520 does do a lot of "crying wolf". 
Meaning, the system attention light comes on and IBM can't seem to
figure 
out why.   But they're pretty quick as to showing you how to turn the 
attention light off.  I wonder if one of those earlier times it actually
did report the power supply.

On a rack mounted 520 you can slide it out and lift the top cover.  The
power supply(ies) are the two boxes in the back right hand side (with
the power plugged in them).  If those lights aren't on, it's a bad
thing.  UPS and IBM guy will be here around the same time.

Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





rob@xxxxxxxxx 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
02/28/2005 11:03 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
midrange-l@xxxxxxxxxxxx
cc

Subject
520 down.






Our 520 is currently down.  520 has no lights on it at all.  The extra 
boxes for it have lights, etc.  Rest of the equipment in the rack is 
functional.  Our 520's supposed to have redundant power supplies.  One
is 
plugged into an IBM PDU the other is plugged into a third party PDU.
The 
IBM PDU had a breaker thrown for that port.  (Has a separate breaker for

each outlet.)  I reset the breaker.  No luck.  I unplugged both cords
from 

the back of the 520, counted to 10, plugged them back in - no
difference. 
HMC says the connect is disconnected.  Only option, not greyed out, is 
reset connection - IBM said not to take that.  Before it died it called 
IBM and told them SRC 11001520 which is an A/C power failure - go
figure.

Weather is lousy.  Slid through a red light on the way in but managed to

stop in time to avoid t-boning this car.  By the look on her face I had 
her undivided attention.

UPS is dead.  It warned us something about a phase out of whack and we
had 

to put it in bypass.  Hope the weather doesn't drop power.  Without the 
UPS - the kick over to the generator still drops a lot of equipment.

Not the first time that the 520 and the UPS fight.  In fact our CE told
me 

that the last time he thought the 520 blew the UPS.  It's a relatively 
sizable Liebert that ran our whole computer room once for 45 minutes 
before it ran out of juice.

Hmm, while waiting for the IBM guy to show up (up to another hour yet) 
maybe I'll unplug the 520 again and verify the power with some other 
equipment.

Haven't heard a return call from the UPS people yet.  (Serviced by JT 
Packard.)

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com

-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.