Re: IP Access behind Dynamic address..

Thanks. Here comes the $64 question. Given all the ports needed for a 
robust Client Access connection, does one need to establish a port map for 
all of them as well? I remember a firewall appliance that required this.


Paul Nelson
Arbor Solutions, Inc.
708-670-6978  Cell
pnelson@xxxxxxxxxx





"Jeff Silberberg" <jsilberberg@xxxxxxxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
12/23/2004 10:19 AM
Please respond to Midrange Systems Technical Discussion
 
        To:     "Midrange Systems Technical Discussion" 
<midrange-l@xxxxxxxxxxxx>
        cc: 
        Subject:        Re: IP Access behind Dynamic address..


Paul an anyone else interested,

    Look at http://www.dyndns.org/services/dyndns/.  I have used them for
many years, to support access to hosts behind dynamic IPs be it cable or
dsl..

    Also, the trick is in the router. You want to do Port Maping.. Dynamic
w.z.y.z:80 is mapped to 192.168.1.2:80 assuming that you iSeries is at
192.168.1.2 and you want HTTP services.

    JMS..

----- Original Message -----
From: <pnelson@xxxxxxxxxx>
To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Sent: Thursday, December 23, 2004 9:43 AM
Subject: Re: AS400 Model 9406-170 IPL Error Code


> Who is your cable modem company? I've got Comcast, and they tell me that 
I
> can't get a static IP address for the modem. If there's a way to tunnel
> through anyway, I'd like to hear from somebody. I've got a D-Link 
router,
> and I've been unsuccessful in getting through from the outside.
>
>
> Paul Nelson
> Arbor Solutions, Inc.
> 708-670-6978  Cell
> pnelson@xxxxxxxxxx
>
>
>
>
>
> Ash G <njas400pgmr@xxxxxxxxx>
> Sent by: midrange-l-bounces@xxxxxxxxxxxx
> 12/22/2004 06:27 PM
> Please respond to Midrange Systems Technical Discussion
>
>         To:     midrange-l@xxxxxxxxxxxx
>         cc:
>         Subject:        Re: AS400 Model 9406-170 IPL Error Code
>
>
> Larry:
>
> Thank you so much for your help! I got another power cord and the box is
> up and running!
>
> Yes, I would love to have a copy of that IBM book you mentioned. Please
> email it to: njas400pgmr at yahoo dot com.
>
> If you would not mind, do you think you can help me setup my AS400 to 
work
> with my Linksys router and cable modem? I have done this in the past 
with
> someone's help, but unfortunately I did not get a chance to take notes!
> I need to set it up with my router and cable modem so that I can have my
> friends access the AS400 remotely from their homes.
> Any help you could provide would be greatly appreciated! Thanks so much
> for all your help!
>
> Ash.
>
>
> ---------------------------------
> Do you Yahoo!?
>  Send a seasonal email greeting and help others. Do good.
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>

-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.