× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Rick,

If you look at the status of QCTL via WRKACTJOB while the system is
dedicated, you will see it is in an end status.

Regards,

Mike Shaw

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rick.baird@xxxxxxxxxxxxxxx
Sent: Thursday, July 15, 2004 3:04 PM
To: Midrange Systems Technical Discussion
Subject: RE: BRMS and bare bones System Save


thanks, Tom and Micheal.

Forgive my ignorance, but isn't the controlling subsystem still running in
order to operate the console and run the backup?

If so, is there any reason I can't just call the QSTRUP?

Or does STRSBS SBSD(QCTL) do something other than run QSTRUP?

If so, will it do any of these things if QCTL is still already running, or
bomb with a 'already in requested state' type of message?

as you see from my list, I want to bring up JUST the QSERVER and QSYSWRK
and restart my IXA servers before continuing with the backup,  and THEN get
everything else up and running.

Thanks a ton!

Rick

-------original message--------
>From restricted state you start your controlling subsystem.  This should
>run your QSTRUP (as specified in SysVal).

--------------
1.  end the IXA servers, in order using VRYCFG (this is important, because
2 of them are failovers to the others and have to be shut down in order).
2.  wait for these servers to shut down.
3  ENDSBS *ALL *IMMED
4.  save *SAVSYS
5.  save *ALLIBM
6. save '/QFPNWSSTG/*' (the IXA server data blob)
7.  STRSBS QSERVER and QSYSWRK
8.  STRTCP
9.  bring up the IXA servers.
10.  save 3 domino servers, and several other things
11.  bring the system back up to it's original state.




--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.