× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



My impression is that you use some sort of remote service to take control 
of that Pc from the PC on your desk, instead of having two separate PC's 
controlling it.  Sort of like a PCAnywhere product.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Urbanek, Marty" <Marty_Urbanek@xxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
02/10/2004 03:22 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'midrange-l@xxxxxxxxxxxx'" <midrange-l@xxxxxxxxxxxx>
cc

Fax to

Subject
Re: V5R2 Console Recommendations






Thanks for the info, Vern. Especially the tip about the addressing.

Does the console recover well (reliably and/or without human intervention)
from network problems (router, switch, etc)  between the console PC and 
the
iSeries, or would this fall under your note #2?

Can I have more than one console on a system, i.e. PC in the computer room
and PC at my desk?

Thanks,
-Marty

------------------------------

date: Tue, 10 Feb 2004 13:48:02 -0600
from: Vern Hamberg <vhamberg@xxxxxxxxxxxxxxxxxxxxxxxxx>
subject: Re: V5R2 Console Recommendations

Marty

I'm using the latest OpsConsole (V5R2) against our V5R1 and V5R2 270s. 
Also 
using PCOMM's Async Console against our V3R7 150. Everything works great 
now, once a couple things are done and observed.

1. If the iSeries is on your internal network (192.168.x.x type 
addresses), 
make sure that you do NOT use 192.168.0.0 subnet mask 255.255.255.0 for 
your internal network - OpsConsole insists on grabbing that whole thing. 
We 
use 192.168.1.0

2. Try not to disconnect the cable - this can mess the thing up, I've used 

a *FULL IPL to have the machine rebuild device info - don't know if that's 

really what's going on, but it has worked.

HTH
Vern
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.