× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



That's a good idea.  Will ptf's still apply during that IPL?

Rob Berendt
-- 
"All creatures will make merry... under pain of death."
-Ming the Merciless (Flash Gordon)




"Bryan Dietz" <bdietz@xxxxxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
12/15/2003 07:15 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Fax to

Subject
RE: Why some ptf's and not others?






One quick thought...If you have to IPL just get to a "normal IPL".  Before
you IPL:   CHGIPLA STRRSTD(*YES)

Doing this should save you the hassle of ending the system back to a
restricted state to IPL. 

This is very handy if you foresee a couple OF IPL's, especially during an 
OS
upgrade.


<help text>
Specifies whether or not the system should be started in the restricted
state, which means that only the system console will be active.  The 
initial
(shipped) value for this attribute is *NO. This attribute is reset to its
initial value after each IPL.
</help text>

This is all I found about detecting the ENDJOBABN:
http://www-1.ibm.com/support/docview.wss?uid=nas1ce96ee887dd2f461862565c2007

d2e84&rs=110



Bryan Dietz


-----Original Message-----
Subject: Re: Why some ptf's and not others?

Beyond checking the system value QABNORMSW before starting, I am not aware
of 
anything Rob. 

I have had to IPL a system to get a normal IPL logged in this system value 

before loading and applying PTF's.  It's  a pain in the rear but lesser 
hassle than than what you have been through today....


Regards,

Mike Shaw

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.