× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Hi Kirk,

on the "d" ipl, the system actually asked for the 2nd tape volume. but after
that I think I took an option to cancel the install.

thanks,

Steve

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Kirk Goins
Sent: Friday, August 15, 2003 10:21 AM
To: Midrange Systems Technical Discussion
Subject: Re: configure alternate installation device


Steve, the alternate installation device is a "device" (typically a
tape) not on the first I/O bus of the system, so the base CD isn't that.

Now somewhere along the line IBM decided to somehow remember where the
system was reloaded from last time. I have had a systems sit there for
up to 45 minutes looking for a darn tape drive before it used the CD.

So try this... Start your "D" IPL and go to lunch. If it hasn't used the
CD in an hour... maybe the CD is broke

Steve Richter wrote:
> I have a 170 that I bought from IBM/ebay.
>
> When I try to ipl from "d", that is the cd rom drive, the ipl fails
because
> the system cannot find the tape drive. But I dont have a tape drive, only
an
> optical drive. ( turns out I dont have to reinstall the os, but anyway
... )
>
> So now I am trying to change the alternate installation device to the
> optical drive ( OPT01 ).
>
> I do a manual ipl, get to the dst menu, signon as qsecofr, take the option
> to work with system devices.
>
> I run option 4. optical and the system shows the optical device. ( and the
> cd drive works.  I used it after completing the ipl. )
>
> Then option 5. Alternate installation device.  The panel displays:
>      "(No alternate installation device configured)"
>
> I dont see an f6=add or any way to add/config an alternate installation
> device.
>
> How do I add an alternate installation device on a model 170?
>
>
> thanks,
>
> Steve Richter
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.