RE: Copier printing

As you can see, this is from an older discussion.  I stashed the answer
away, just in case someday I'd need it.  Well, today's the day.  The problem
is, I can't seem to figure out just how to retrieve the source for a *WSCST
object.  When I prompt the Retrieve WSCST source (RTVWSCST) command, I get a
list of device types, not a list of *WSCST objects.  So how do I get the
source of the QWPHP5SI work station customization object so that I can tweak
the paper drawer?

> -----Original Message-----
> From: Simon Coulter [SMTP:shc@xxxxxxxxxxxxxxxxx]
> Sent: Monday, June 30, 2003 6:35 PM
> To:   Midrange Systems Technical Discussion
> Subject:      RE: Copier printing
> 
> 
> Hello David,
> 
> You will have to find out the PCL incantations that select the paper
> trays. This 
> may be the same as standard HP but is often different. Once you have that 
> information then retrieve the source for the *HP6 WSCST object (presuming
> the 
> 'copier service guy' is correct). Then edit that source and locate the
> :DRAWER 
> tag and change the incantation for drawer 1 to be whatever selects the
> bulk 
> paper tray. Save the source, compile it using the CRTWSCST command, and
> specify 
> the new WSCST object on the WSCST keyword of the definition.
> 
> Since specifying drawer 3 on the spooled file selects the correct drawer
> you 
> could simply swap the incantations for drawers 1 and 3 in the WSCST
> source.
> 
> If the printer supports SNMP or PJL (commonly called port9100 support)
> then you 
> will get better control by defining it as a *LAN printer rather than as a 
> remoute output queue.
> 
> Regards,
> Simon Coulter.
> --------------------------------------------------------------------
>    FlyByNight Software         AS/400 Technical Specialists       
>                                                                   
>    http://www.flybynight.com.au/                                  
>    Phone: +61 3 9419 0175   Mobile: +61 0411 091 400        /"\   
>    Fax:   +61 3 9419 0175   mailto: shc@xxxxxxxxxxxxxxxxx   \ /   
>                                                              X    
>                  ASCII Ribbon campaign against HTML E-Mail  / \   
> --------------------------------------------------------------------
> 
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.