RE: Memory install in 9402-400

Thank you both very much. I'm trying to prepare for a little consulting
job this weekend and can't rip open the machine ahead of time, but this
should be enough info. Per the handbook, you're right about the number
of slots. It doesn't mention the pairing, but I was assuming as much.
I'll report back for the archives if anything is significantly
different.

Kind regards,
Z

> -----Original Message-----
> From: Douglas Handy [mailto:dhandy1@xxxxxxxxxxxxx]
> Sent: Thursday, February 20, 2003 11:58 AM
> To: Midrange Systems Technical Discussion
> Subject: Re: Memory install in 9402-400
> 
> 
> Carl / Zak,
> 
> >It is on the motherboard, I believe there are 3 slots for 
> memory SIMS.  Be
> >careful, I have broken the clips before.
> 
> I think it is three *pairs* on the 400, and four pairs on my 
> 40S.  Each slot in
> a given pair must be populated with the same size memory 
> stick (eg feature 3110
> for 64MB).  Different pairs can have different sizes.   The 
> 9402-400 maxes out
> at 192MB (three 3110 feature codes, which is 6 sticks of memory).
> 
> As I recall (but it has been a few years), the pairs were 
> vertical.  IE, on my
> 40S there were two rows of 4 slots, and I think the 400 has 
> two rows of 3 slots.
> Populate a vertical column of slots, starting from the left 
> as you face it.
> 
> As I recall...
> 
> Doug
> _______________________________________________
> This is the Midrange Systems Technical Discussion 
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
> 
>
NOTICE: This E-mail may contain confidential information. If you are not
the addressee or the intended recipient please do not read this E-mail
and please immediately delete this e-mail message and any attachments
from your workstation or network mail system. If you are the addressee
or the intended recipient and you save or print a copy of this E-mail,
please place it in an appropriate file, depending on whether
confidential information is contained in the message.