× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



[ Converted text/html to text/plain ]

Are you running Domino on this box?  We had to put up some PTF's to correct a
run away Domino job that was gobbling up our temp storage and was near ready
to crash the system.

Usually when twinax display shows top left corner, it is not
communicating.....the device can be varied off.  I have also seen a controller
go bad on the system and have to have hardware replaced.

Just a couple of ideas to check.  Hope this helps.

Gail Crane
Johanson Manufacturing Corp.
phone 973-334-2676
gcrane@johansonmfg.com


Joe Lewis <joelewis@joesystems.com>
Sent by: midrange-l-admin@midrange.com
11/14/2002 02:51 PM
Please respond to midrange-l
To: midrange-l@midrange.com
cc:
bcc:
Subject: AS/400 Locking up

About 30 days ago for the first time, my little 170 just locked up.  TCP
and Twinax stopped working, no error code on the front panel, the power
light was green, and the processor light was lit up solid.   After
talking with IBM (hours later), I had to manual power down.  Once back
up, there were no error listings in any of the logs or in Service Tools.
Then 2 weeks later, it did it again.  Then over this past weekend,
again yesterday and now this morning.  Hardware support thinks it's
software.  I am on hourly support with Software, and I don't want to
spend the money just find out it's an IBM issue ($250 an hour is not in
my budget).  I upgrade to v5r1 ,with all the PTFs at the time, in
February.  Nothing new has been added since then.  Other then ordering
the latest CUM (which I did), I am stumped.  Has anyone ran into this
before?
- Joe Lewis
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l[1]
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l[2].

===References:===
  1. http://lists.midrange.com/cgi-bin/listinfo/midrange-l
  2. http://archive.midrange.com/midrange-l



As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.