× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Mary Jo,

The minimum supported release for the #2435 processor is V5R1.  If your
friendly CE wants to install the MES and verify that your system works,
you must do an upgrade prior to his or her work.  Otherwise, you will
have the hardware installed and then power up directly into an upgrade.
Even that might not be possible (I'm ignorant here, you should be able
to IPL directly from CD following the hardware upgrade but it strikes me
as scary because you're increasing complexity and haven't verified that
the hardware upgrade was successful.)

Both V4R5 -> V5R1 and V4R5 -> V5R2 upgrades are supported.  As Alex
Moore suggested in his post, remember to read the documentation for both
upgrades so you're aware of all of the changes if you jump two releases.

What are the specific reasons for not upgrading the OS prior to the
hardware?  Could you just limp along with bad performance so that you
can verify the OS upgrade, then do the hardware?  Or is there something
which absolutely prohibits this upgrade?

My preference in your situation would be to find a way to upgrade the
software (your preference as to whether you go to V5R1 or V5R2, I would
go to V5R2).  Make sure the machine will boot and function, then have
the hardware upgrade done immediately.  All on the same weekend.

Regards,
Andy Nolen-Parkhouse

> admin@midrange.com] On Behalf Of Mary Jo Whitcomb
> Subject: 820-2395 to 820-2435 V5R1 or V5R2?
>
> We have an 820 2395 and are running V4R5 and cannot upgrade the
> operating
> system until we upgrade the machine.  We purchased the MES to upgrade
> it to
> an 820 2435 before V5R2 was available.  For reasons I won't go into,
it
> has
> not been installed yet, but it well be soon now.  I got V5R1 for the
> install
> back when we ordered the MES, and the box has been sitting right next
> to the
> box with the 2435 MES.
>
> When our friendly CE installs the MES, can we go directly to V5R2, or
> do we
> have to install V5R1 and then V5R2?  As we are a hospital, the less
> downtime, the better.
>
> Thanks for any advice you can give me.
>
> Mary Jo



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.