RE: Trying to print to a larger print file on legal paper

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
x-gfisavedcharset: iso-8859-1

I am sending the complete Device Description for you to see.

Thanks


Device description . . . . . . . . :   P25

Option . . . . . . . . . . . . . . :   *BASIC

Category of device . . . . . . . . :   *PRT



Device class . . . . . . . . . . . :   *LCL

Device type  . . . . . . . . . . . :   3812

Device model . . . . . . . . . . . :   1

Advanced function printing . . . . :   *NO

Port number  . . . . . . . . . . . :   3

Switch setting . . . . . . . . . . :   5

Online at IPL  . . . . . . . . . . :   *NO

Attached controller  . . . . . . . :   CTL01

Font:

  Identifier . . . . . . . . . . . :   011

  Point size . . . . . . . . . . . :   *NONE

Form feed  . . . . . . . . . . . . :   *AUTOCUT

Separator drawer . . . . . . . . . :   *FILE
Separator program  . . . . . . . . :   *NONE
Printer error message  . . . . . . :   *INFO
Message queue  . . . . . . . . . . :   QSYSPRT
  Library  . . . . . . . . . . . . :     QGPL
Current message queue  . . . . . . :   QSYSPRT
  Library  . . . . . . . . . . . . :     QGPL
Host print transform . . . . . . . :   *NO
Paper source 1 . . . . . . . . . . :   *MFRTYPMDL
Paper source 2 . . . . . . . . . . :   *MFRTYPMDL
Envelope source  . . . . . . . . . :   *MFRTYPMDL
ASCII code page 899 support  . . . :   *NO
Image configuration  . . . . . . . :   *NONE
Workstation customizing object . . :   *NONE
User-defined object  . . . . . . . :   *NONE
  Object type  . . . . . . . . . . :     *NONE
Data transform program . . . . . . :   *NONE
User-defined driver program  . . . :   *NONE
Dependent location name  . . . . . :   *NONE
Allocated to:
Job name . . . . . . . . . . . . . :   P25
  User . . . . . . . . . . . . . . :     QSPLJOB
  Number . . . . . . . . . . . . . :     819092
Published  . . . . . . . . . . . . :   *NO
Publishing information:
  Support duplex . . . . . . . . . :   *UNKNOWN
  Support color  . . . . . . . . . :   *UNKNOWN
  Pages per minute black . . . . . :   *UNKNOWN
  Pages per minute color . . . . . :   *UNKNOWN
  Location . . . . . . . . . . . . :   *BLANK
Text . . . . . . . . . . . . . . . :   Lazer printer-XEROX/Acom

-----Original Message-----
From: Andy Nolen-Parkhouse [mailto:aparkhouse@attbi.com]
Sent: Friday, October 04, 2002 2:58 PM
To: midrange-l@midrange.com
Subject: RE: Trying to print to a larger print file on legal paper


Tom,

What is the manufacturer type/model contained in the device description
P16?  What the actual device is doesn't matter so much as what the
AS/400 thinks it is.  That may be where the problem lies.

Regards,
Andy Nolen-Parkhouse

> On Behalf Of Tom Colbert Info Technology
> Subject: Trying to print to a larger print file on legal paper
>
> I am trying to print on legal sized paper but am receiving the
following
> message.
>
>
>
> Message ID . . . . . . :   CPA3388       Severity . . . . . . . :   99
>
> Message type . . . . . :   Inquiry
>
> Date sent  . . . . . . :   10/04/02      Time sent  . . . . . . :
> 12:00:20
>
>
>
> Message . . . . :   Attributes of file F2905TSTR not supported for
device
> P16.
>    (C G T H I)
>
> Cause . . . . . :   Writer P16 found attributes of file F2905TSTR
number 2
> job
>   820295/TCOLBERT/QPADEV005N on output queue P16 in library QUSRSYS
that
> are
>
>   not supported for device P16. The error code, or codes, are 1.  The
> error
>
>   codes and their meaning are as follows:
>
>     1 - Page size of file not supported on device.
>
>     2 - Device type of file not supported on device.
>
>     3 - Lines per inch (LPI) of file not supported on device.
>
>     4 - Special device requirements of file not supported on device.
>
> Recovery  . . . :   Enter C to cancel the writer and G or T to process
the
>
>
> More...
> I am trying to test it by using a Sequel report that has width set to
250,
> cpi 15. I have tried printing it on both a HP laser jet and a larger
xerox
> laster printer, getting the same results from both. I thought maybe it
> might
> have something to do with the device setup, but nothing has panned out
> there
> yet. We are already printing on 8.5 X 11 with the following CL on both
of
> these printers.
>  OVRPRTF FILE(PRINT) PAGESIZE(*N 198) CPI(15) + OUTQ(P25) COPIES(1)
> HOLD(*YES) SAVE(*YES) + USRDTA(FLASHSLS)
> Now we would like to expand out to legal and get more on the report.

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.