Re: Configure HP670 on AS400 as remote *OUTQ

Synapse has an  LPD/LPR client on the PC as part of their IP Client package
that works with any LPR system whether it be Unix, Linux, mainframe, or
AS400.  A free demo is at www.synapse.com.

I sell, supplort, use, and recommend Synapse products.

Jerry

Jerome Draper, Trilobyte Software Systems, since 1976
Network and Connectivity Specialist -- Mac's, LAN's, PC's, and iSeries
Representing Synapse, Nlynx, Perle, CLI, Intermate and Others .....
(415) 457-3431 - (415) 258-1658fax - http://www.trilosoft.com



----- Original Message -----
From: Carl Galgano <cgalgano2@ediconsulting.com>
To: <midrange-l@midrange.com>
Sent: Wednesday, September 25, 2002 4:01 AM
Subject: RE: Configure HP670 on AS400 as remote *OUTQ


> Peter:
> My comment concerning 'raw' for the remote print queue is not correct.
> I read the rest of the thread and saw that this printer is attached to a
> PC and not directly on the network.  As Syd has suggested, you need an
> LPD/LPR client on the PC where the printer is attached.  I suppose you
> could also do this with Client Access.  Mochasoft has an LPD/LPR client
> that works well with the AS400 (I think for $25).  I have also used
> NIPrint from Network Associates.
>
> cjg
>
>
> Carl J. Galgano
> EDI Consulting Services, Inc.
> 550 Kennesaw Avenue, Suite 800
> Marietta, GA  30060
> (770) 422-2995 - voice
> (419) 730-8212 - fax
> mailto:cgalgano@ediconsulting.com
> http://www.ediconsulting.com
> AS400 EDI, Networking, E-Commerce and Communications Consulting and
> Implementation
> http://www.icecreamovernight.com
> Premium Ice Cream Brands shipped Overnight
>
> "You ain't gonna learn what you don't want to know" - rw
>
>
> I just found out that:
>
> a) Printer is directly attached to a PC, no "little boxes" in between.
> b) On the IBM documents, the equivalent for the HP DeskJet 970Cxi is the
> HP500 on the MFRTYPMDL parameter.
>
> I did ENDWTR and STRRMTWRT again, but nothing happened.
> I did turned off / on the printer, but nothing happened.
>
> I will keep on trying...
>
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>