Re: Configure HP670 on AS400 as remote *OUTQ

Your config looks fine. The only question I would have is the font 042,
but this may be differences between our countries.

When you first send a print to the printer, the 400 will send a message
to QSYSOPR asking you to load forms - usually *STD. Is there any
possibility that this message is being answered automatically with a 'H'
to hold the print???

Similarly, if you get a verify alignment message, is this being
automatically answered??

Syd Nicholson


Peter_Vidal@pall.com wrote:

This is the actual configuration of the device on the AS400:

Device description . . . . . . . . :   DEVD        RODPRINTER
Option . . . . . . . . . . . . . . :   OPTION      *BASIC
Category of device . . . . . . . . :               *PRT

Device class . . . . . . . . . . . :   DEVCLS      *VRT
Device type  . . . . . . . . . . . :   TYPE        3812
Device model . . . . . . . . . . . :   MODEL       1
Advanced function printing . . . . :   AFP         *NO
Online at IPL  . . . . . . . . . . :   ONLINE      *NO
Attached controller  . . . . . . . :   CTL         QVIRCD0006
Font . . . . . . . . . . . . . . . :   FONT
 Identifier . . . . . . . . . . . :               042
 Point size . . . . . . . . . . . :               *NONE
Form feed  . . . . . . . . . . . . :   FORMFEED    *AUTOCUT
Separator drawer . . . . . . . . . :   SEPDRAWER   *FILE
Separator program  . . . . . . . . :   SEPPGM      *NONE
Printer error message  . . . . . . :   PRTERRMSG   *INFO
Message queue  . . . . . . . . . . :   MSGQ        QSYSOPR
 Library  . . . . . . . . . . . . :                 *LIBL
Current message queue  . . . . . . :               QSYSOPR
 Library  . . . . . . . . . . . . :                 QSYS
Host print transform . . . . . . . :   TRANSFORM   *NO
Manufacturer type and model  . . . :   MFRTYPMDL
Paper source 1 . . . . . . . . . . :   PPRSRC1     *MFRTYPMDL
Paper source 2 . . . . . . . . . . :   PPRSRC2     *MFRTYPMDL
Envelope source  . . . . . . . . . :   ENVELOPE    *MFRTYPMDL
ASCII code page 899 support  . . . :   ASCII899    *NO
Image configuration  . . . . . . . :   IMGCFG      *NONE
Workstation customizing object . . :   WSCST       *NONE
User-defined object  . . . . . . . :   USRDFNOBJ   *NONE
 Object type  . . . . . . . . . . :                 *NONE
Data transform program . . . . . . :   USRDTATFM   *NONE
User-defined driver program  . . . :   USRDRVPGM   *NONE
Dependent location name  . . . . . :   DEPLOCNAME  *NONE
Allocated to:
Job name . . . . . . . . . . . . . :               RODPRINTER
 User . . . . . . . . . . . . . . :                 QSPLJOB
 Number . . . . . . . . . . . . . :                 183542

This is the actual configuration of the output queue:
Queue:   RODPRINTER     Library:   QUSRSYS

Status:
 Writer active  . . . . . . . . . . . :   Y
 Writer name(s) if active . . . . . . :   RODPRINTER
 Output queue held  . . . . . . . . . :   N
Maximum spooled file size:
 Number of pages  . . . . . . . . . . :   *NONE
 Starting time  . . . . . . . . . . . :
 Ending time  . . . . . . . . . . . . :
Writers to autostart . . . . . . . . . :   1
Display any file . . . . . . . . . . . :   *NO
Job separators . . . . . . . . . . . . :   0
Operator controlled  . . . . . . . . . :   *YES
Order of files on queue  . . . . . . . :   *FIFO
Data queue . . . . . . . . . . . . . . :   *NONE
 Library  . . . . . . . . . . . . . . :
Authority to check . . . . . . . . . . :   *OWNER
Remote system  . . . . . . . . . . . . :   *NONE



User defined option  . . . . . . . . . :   *NONE
User defined object:
  Object . . . . . . . . . . . . . . . :   *NONE
    Library  . . . . . . . . . . . . . :
  Object type  . . . . . . . . . . . . :
Spooled file ASP . . . . . . . . . . . :   *SYSTEM
Text description . . . . . . . . . . . :   Default output queue
for printer RODPRINTER

Peter Vidal
Pall Aeropower Corp. / SR Programmer Analyst
: www.pall.com  / + Peter_Vidal@Pall.com
(727-539-8448, x2414