Re: LPR printer writer abends

Jay, if you're at 4.3, make sure you have all the PTF's. I remember
some TCP/IP PTF's that solved this same problem

> Hi Jay,
>
> >From your posting, it sounds like you might have an OS/400 definition
> mismatch in that you have activated the System Driver Program
*HPPJLDRV
> within a remote output queue definition. Remote Output Queues are
defined to
> use LPR transport and not a TCP Raw Socket.
>
> If this is not the problem, the OS/400 message means it was unable to
> establish a connection to port 515 on the JetDirect interface. The
most
> usual reason is that the printer was busy at that moment servicing a
print
> request from a different host and the IBM host timed out. The XAUTOQ
feature
> of a remote output queue is the best method of overcoming this
difficulty.
>
> I have some examples of how to configure both a remote output queue
and *LAN
> printer in pdf format. I would be happy to send them to you off list.
Please
> let me know if this would be useful.
>
> HTH
>
> Best Regards,
>
> /Paul
> --
> Paul Tykodi
> National Product Manager
> Intermate US Inc.
>
> p: 603-431-0606 x115
> f: 603-436-6432
> E-mail: paul@intermate-us.com
> www.intermate.com
>
> >Date: Sat, 14 Sep 2002 09:09:52 -0500
> >From: Jay Maynard <jmaynard@conmicro.cx>
> >To: midrange-l@midrange.com
> >Subject: LPR printer writer abends
> >Reply-To: midrange-l@midrange.com
> >
> >I'm trying to set up printing via LPR to a LaserJat 4Si with
JetDirect card
> >from OS/400 4.3. (If I can ever get the 5.1 install media from IBM,
I'll
> >upgrade...ordered it three weeks ago.) Starting the print writer
succeeds,
> >but then the writer fails with an internal program error in module
WPPJLDR,
> >procedure Socket_Connect. The diagnostic message ID is CPD337A.
> >
> >Looking through the archives, I see a couple of other folks have had
this
> >problem. Has anyone out there successfully printed to a LaserJet via
LPR
> >with the PCL driver?
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>

--
Paul Nelson
630-327-8665