Re: SNA (Yes SNA) setup - will it autoconfig?

We stayed with the serial connection. It has worked great. The library can
support at least 8 serially connected systems, so it should meet our needs. If
we go to fiber attach on the drives, with more than 8 systems, we would revisit
ethernet. I am pretty sure it could be made to work, but by the time I got
involved, we had no time to attempt fixing the problems.
Bob

"Walden H. Leverich" wrote:

> Bob,
>
> So do I understand you correctly that you basically gave up on the ethernet
> attach and are talking to the library via serial? Is this a stop-gap or your
> final solution?
>
> -Walden
>
> ------------
> Walden H Leverich III
> President
> Tech Software
> (516) 627-3800 x11
> (208) 692-3308 eFax
> WaldenL@TechSoftInc.com
> http://www.TechSoftInc.com
>
> Quiquid latine dictum sit altum viditur.
> (Whatever is said in Latin seems profound.)
>
> -----Original Message-----
> From: Bob Larkin [mailto:blarkin@wt.net]
> Sent: Wednesday, September 04, 2002 00:29
> To: midrange-l@midrange.com
> Subject: Re: SNA (Yes SNA) setup - will it autoconfig?
>
> Walden,
> We had problems attempting to connect two 820s via ethernet to on 3494. One
> gotcha is that the 3494 is 10M NIC, not 100!! I did not do initial ethernet
> setup, but I could not get it to work, plus it would have required a
> dedicated NIC in each 820 because our network is pure 100M.  We went with
> serial connections from the modem/serial card (9447?) to the 3494. Those
> connections are used for BRMS to communicate to the 3494 tape library. For
> the SNA communications between the 820s for synchronization, we use SNA over
> IP through Gigabit NICs that are also used for our Domino replication. Bob
> Larkin
>
> "Walden H. Leverich" wrote:
>
> > Two iSeries (actually AS/400s) that need to talk SNA to eachother
> > (actually to a 3494 tape library). It's been so long since I setup a
> > SNA network I don't remember it. On V4R5 if I create the lines and
> > vary them on will the two systems auto config? I already have them
> > talking via opti-connect if that changes anything.
> >
> > -Walden
> >
> > PS. Is it really true that the 5494 won't talk IP to an AS/400 until
> > V5R2?
> >
> > ------------
> > Walden H Leverich III
> > President
> > Tech Software
> > (516) 627-3800 x11
> > (208) 692-3308 eFax
> > WaldenL@TechSoftInc.com
> > http://www.TechSoftInc.com
> >
> > Quiquid latine dictum sit altum viditur.
> > (Whatever is said in Latin seems profound.)
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> > list To post a message email: MIDRANGE-L@midrange.com To subscribe,
> > unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > or email: MIDRANGE-L-request@midrange.com
> > Before posting, please take a moment to review the archives at
> > http://archive.midrange.com/midrange-l.
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com To subscribe, unsubscribe,
> or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.