RE: ifs mapping with client express

Glad it helped. I wish I remembered how I learned this. It's useful to know
HOW to find info.

BTW, this 'root' share is never created by the system - you need to do it
yourself. If, for any reason, you need to replace OS/400, you need to do
this again. I wonder if it's necessary for an upgrade.

There was something some yeasrs back, that you could no longer map to just
the network name of the 400. Might have been in literature about changing
from Client Access shared folders to NetServer.

At 05:07 PM 7/10/02 -0700, you wrote:
>Bless You!!!  It Worked....
>
>There is no way, I would have figured that out in my natural lifetime... :-)
>
>Tim
>
> > -----Original Message-----
> > From: Vernon Hamberg [SMTP:vhamberg@attbi.com]
> > Sent: Wednesday, July 10, 2002 4:54 PM
> > To:   midrange-l@midrange.com
> > Subject:      Re: ifs mapping with client express
> >
> > It is different? You need to create a share in Ops Nav (go to
> > Network->Servers->TCP/IP. Open NetServer and add a share called root,
> > read/write, that points to '/'. Then map to \\235.37.6.49\root
> >

-snip-

> > >Any ideas, if the mapping portion is different under express?
> > >
> > >Thanks, tim