× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Joe,

            Should be    S/1     iSeries
                                ENQ  -->
                                  <-----ACK0
                                 DATA --->
                                   <----ACK1
                                 EOT---->

            Then there is the IRS or ITB, and ETB or ETX, and a bunch of
other things.  First time I did this was 1974 (I think) with a SYSTEM 34.
Did it with Series/1s and System 38s in the 80's, and I have done a few with
AS/400s and Banks in the 90s.  Be happy to try and help if you want...  Have
a Library on ??Tape?? around here somewhere with my Bysnc tools.. Do you
have an SST Comtrace ?? Or you using something external like ComProbe ??

JMS

Jeffrey Silberberg
CompuDesigns, Inc.
Atlanta, GA.

----- Original Message -----
From: <jleyden@co.la.ca.us>
To: <midrange-l@midrange.com>
Sent: Wednesday, November 28, 2001 7:46 PM
Subject: RE: Cmd to read from a comm LINE - pt to pt BSC


>
> Actually the AS400 gets the first test message I sent
> (from the Series/1) using a trace at the AS400.
> The problem is all I have is *PGM without having
> any real program reading the line.
>
> I'm also wondering where did the AS400 store that first
> message I saw on the trace.
>
> The AS400 was suppose to responde with an ACK1 so I could
> continue to send the next message but it responds with an
> ETX which terminates the communication.
>
> Joe
>
> -----Original Message-----
> From: Joe Leyden [mailto:jleyden@co.la.ca.us]
> Sent: Thursday, November 29, 2001 12:18 AM
> To: 'midrange-l@midrange.com'
> Subject: RE: Cmd to read from a comm LINE - pt to pt BSC
>
>
> connected point-to-point using a modem eliminator.
> thanks!
> Joe
>
> -----Original Message-----
> From: midrange-l-admin@midrange.com
> [mailto:midrange-l-admin@midrange.com]On Behalf Of Jerry Sprout
> Sent: Thursday, November 29, 2001 12:00 AM
> To: midrange-l@midrange.com
> Subject: Re: Command to read from a (communication) LINE
>
>
> I have a set of CL commands that do bisync communications.  The program is
> an MI program I wrote back in the 38 days.  You cannot use this program if
> your AS/400 is at level 40 or higher because it crosses the domains.  I
> started an attempt to rewrite this program in RPGILE.  Once I got ready to
> test it, the project was benched 'cause the guy that wanted to go to level
> 40 got fired.  It is really a pretty simple thing.  The most complicated
> part is making a connection.  That is where I was testing.  Doing
> autodialing.  Let me know how you are connected (dialup, direct, leased
> line).  Maybe I can get the program to work for you. (Actually, I'll get
JT
> to do it.) Hopefully you won't have too much need for other bisync tasks.
> ----- Original Message -----
> From: "Shannon O'Donnell" <orion@auburnctnet.com>
> To: <midrange-l@midrange.com>
> Sent: Wednesday, November 28, 2001 4:58 PM
> Subject: Re: Command to read from a (communication) LINE
>
>
> > You'll need to create an ICF file and a program to acquire and read from
> it.
> >
> > So the answer to your question is no, there is no CL command to read
from
> a
> > BSC line. It's a bit more complicated than that.
> >
> > You might want to check out the ICF Programmer's Guide which you can
find
> > at:
> >
> > http://publib.boulder.ibm.com/pubs/html/as400/online/v4r1eng.htm
> >
> > Search Books with Titles for "ICF" and you'll find the book "ICF
> Programming
> > V4R1".
> >
> >
> > ----- Original Message -----
> > From: <jleyden@co.la.ca.us>
> > To: <midrange-l@midrange.com>
> > Sent: Wednesday, November 28, 2001 3:33 PM
> > Subject: RE: Command to read from a (communication) LINE
> >
> >
> > > am not an AS400 programmer,
> > > is there a command (CL) that reads any data
> > > from a BSC line. The AS400 BSC line is using
> > > *PGM instead or *RJE as the primary program.
> > >
> > > Joe
> > >
> > > _______________________________________________
> > > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> > list
> > > To post a message email: MIDRANGE-L@midrange.com
> > > To subscribe, unsubscribe, or change list options,
> > > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > > or email: MIDRANGE-L-request@midrange.com
> > > Before posting, please take a moment to review the archives
> > > at http://archive.midrange.com/midrange-l.
> > >
> >
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> > To post a message email: MIDRANGE-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > or email: MIDRANGE-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>




As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.