Re: Power down schedule

Will check on next pass, thanks,,
Ken

neilp@dpslink.com wrote:
>
> Have you verified that the ENDTCP actually worked or is the QTCPIP job in
> the QSYSWRK sybsystem still sitting there with a status of END ?
> I have seen several times on V4R4 and V4R5 (admittedly when the PTF cum
> level is a little old), especially with the model 150, cases where TCP/IP
> hangs and will not end.  This prevents ENDSYS *IMMED or PWRDWNSYS *IMMED
> from working, and you must force a power down or IPL from the front panel.
> It often seems to be related to a PPP job (line QTPPANSnnn) first hanging
> and being unable to end with either ENDJOB *IMMED or ENDJOBABN *IMMED.
>
> ken shields <kjs@idirect.com>
> Sent by: midrange-l-admin@midrange.com
> 2001/09/22 23:05
> Please respond to midrange-l
>
>         To:     midrange-l@midrange.com
>         cc:
>         Subject:        Re: Power down schedule
>
> I normally ENDTCP, and power off the M36   mschine, I don't ENDSBS.
> Unless the scheduler is part of the tcp group.
> Ken
>
> Eduard van den Braken wrote:
> >
> > You probably ended the subsystem with de scedular !
> >
> > Groetjes (Greetings)
> >
> > ===========================================================
> > Name: Eduard van den Braken
> > E-mail: e.vd.braken@hccnet.nl
> > Town: Leusden -- the Netherlands
> > Homepage: http://home.hccnet.nl/e.vd.braken/
> > ===========================================================
> >
> > ----- Original Message -----
> > From: "ken shields" <kjs@idirect.com>
> > To: "MIDRANGE-L" <MIDRANGE-L@midrange.com>
> > Sent: Saturday, September 22, 2001 4:58 AM
> > Subject: Power down schedule
> >
> > >   I have set the power off schedule, as an example; to 5:00 pm to-day,
> > > Ended all sub-systems, signed off the console, but it does nor power
> > > down.
> > > Model 150, V4R4
> > > Sounds dumb, but what have I not done?
> > > --
> > > Best Regards
> > > Ken Shields
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.

--
Best Regards
Ken Shields
Home phone: 905 404-2062
Bus  phone  905 725-1144 (326)