× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Well there is no permissions tab for printer under Netserver.  Printers do
not show up under file shares, so it must use native AS400 object authority.
Does your guest profile have authority to the printer and out queue and the
print file specified under the printer properties tab in Netserver?

Start with: Ops Nav - Network - Servers - TCP/IP - Netserver
Select your printer and check the properties.  This is where you configure
the outq and optional print file to use.

Christopher K. Bipes      mailto:ChrisB@Cross-Check.com
Operations & Network Mgr  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.                  http://www.cross-check.com
6119 State Farm Drive     Phone: 707 586-0551 x 1102
Rohnert Park CA  94928    Fax: 707 586-1884

-----Original Message-----
From: Denis Robitaille [mailto:DRobitaille@cascades.com]
Sent: Friday, June 29, 2001 10:03 AM
To: MIDRANGE-L@midrange.com
Subject: RE: Netserver print share


How do I do this?

Denis Robitaille
Directeur services techniques
Cascades Inc
819 363 5187
fax 819 363 5177


>>> chris.bipes@cross-check.com 06/29/01 11:54am >>>
Make sure you guest profile has authority to the printer share.

-----Original Message-----
From: Denis Robitaille [mailto:DRobitaille@cascades.com] 
Sent: Friday, June 29, 2001 7:36 AM
To: MIDRANGE-L@midrange.com 
Subject: Netserver print share


Hello all,

here is the situation: I configured Netserver on my AS/400 (V4R4). I used a
gest profil. This way I can access the IFS no problem. After that I created
a share for a printer. But when I install the printer on my PC and tell it
to use the share, I get the message that the printer is not available and
that printing will be done off line. This printer works well when we access
it from the AS/400. I think I must be missing something in netserver.

Any sugestion??


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.