Cant find system consule - IPL OK

Hi,
I have a wee problem with my Model 500 V3R7.
I swapped my 3197c dumb terminal for a smaller 3196 dumb terminal
and the first IPL gave a SRC A900-2000 (Console error) I switched to manual
and powered down.

Found the twinaxe  cable was faulty and swapped the cable ;
IPLs OK 01 B normal mode. but cant find the system console (the cursor on
the dumb terminal is flashing in bottom left hand corner which proves I have
a good connection.
Tried all the address settings 0 - 6 and all eight ports on the junction
box. to no avail.

I'm sure that the new 3196  dumb terminal  is working as it passes every
test in the handbook; I seem to recall I had a similar problem when I first
purchased the machine and tried to set up the 3197c dumb terminal ; It got a
sign on screen when I set the second session to address 1 (Port 0)
This time its not so simple.any ideas welcome as to why my trusty AS/400 is
playing games with me.?
Thanks in advance
Dave



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---