× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



try dsplog qhst - prompt F4 & enter date & time range,
I like to go to print, then scan print (scan "error", "failed", CPF, etc)
Joblogs after ipl in qezjoblog may also help. System is very
good about coming back ok.
jim
----- Original Message -----
From: <D.BALE@handleman.com>
To: <MIDRANGE-L@midrange.com>
Sent: Wednesday, April 11, 2001 4:59 PM
Subject: Help w/ AS/400 power crash


> One of our overseas AS/400s suffered a power-outage crash.  It was hooked
up
> to the UPS, but the UPS was apparently switched to "bypass" mode.
Someone's
> head may roll for this.  (Not my decision.)
>
> Once it was brought back up, several of our device descriptions were lost,
and
> auto-config had to be turned on briefly to get everything back up in a
pinch.
>
> It raises the question for me:  What else is damaged out there?  The power
> outage occurred 5 days ago, and we've been running fine (as far as I
know).
> What should I be looking for?  For some reason, the *SYSOPR message queue
was
> somehow cleared several hours ago, so I don't know how to look for
problems
> that would have been identified in there.
>
> Any help is greatly appreciated.
>
> Dan Bale
> IT - AS/400
> Handleman Company
> 248-362-4400  Ext. 4952
> D.Bale@Handleman.com
>   Quiquid latine dictum sit altum viditur.
>   (Whatever is said in Latin seems profound.)
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.