9406-S30 RAID config question

Hello all,
another "what if" question:
configuration is: 9406-S30 with 10x 4 GB (6907, two byte disks)
and a 6532 SPD RAID-5 controller, currently configured as one RAID-set.
Slots available for disks are 12 maximum in base unit.
The 6532 is specified as capable of having 4 to 10 drives in one RAID-set
and being able to have four RAID-sets attached.
When adding another two 4GB drives of same type as above, do I have
to form a second set, or just add them and they are running "side by side" ?
When forming two sets of, lets say, 8 disks in set 1 and 4 disks in set 2,
is it the right way to go to DST and stop RAID, select the first 8 disks to
make up set 1, then start protection, then the same with the rest for set 2 ?

Any help is appreciated, thanks in advance !

Regards from germany, Philipp Rusch


 -----------------------------------------------------------------
| EDV Beratung Rusch          EDP Consulting Rusch                |
| Philipp Rusch               Mailto: Philipp.Rusch@rusch-edv.de  |
| Am Errlich 9                WWW   : http://www.rusch-edv.de/    |
| D-61191 Rosbach,                                                |
| Germany                                                         |
| Phone: (+49) 6003 3972      Mobile : (+49) 172 89 86 230        |
| Fax  : (+49) 6003 3795                                          |
|                                                                 |
 -----------------------------------------------------------------


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---