× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: Entire RAID set non-reporting
  • From: Douglas Handy <dhandy1@xxxxxxxxxxxxx>
  • Date: Thu, 21 Dec 2000 02:26:35 -0500

Larry,

>I would ask: In DST can you SEE the
>drives as being attached to the 6502? As I recall the drives Should
>appear there. 

All appear under the 6502 in DST, but all are listed as non-reporting.  I've
since also discovered the service action log in DST, which lists all 8 drives
with a reference code of 0000 but with each entry also lists the 6502 with a
reference code of 3110.  See my last reply to Kirk.

Under DST, if I display the disk configuration status, ASP 1 shows the two
mirrored drives on the MFIOP as status "Active", and all 8 drives on the 6502 as
status "DPY/Unknown".  The 8 drives' unit numbers are also flagged with an
asterik with the notation "Indicates the unit is missing from the
configuration."

> As Kirk says if 2 or more fail then the set is toast and
>a reload is in your future. 

I understand that, and have a complete backup available.  I even have 3 or so
spare 6606 drives -- but definately not 8 of them.  Do you still have spares?  I
may be very interested Real Soon Now ...

Alternatively, I may be looking for a 6502 or 6522.  Have one of those laying
around? <g>  I wish now I had a spare one to try swapping in as a quick test.

Reloading the system is not a big deal -- but I can't do it on a single pair of
mirrored 6606's...

>I would think the ones still functioning
>should still appear, even if they don't spin up.  

Another reason I suspect the 6502 instead of the 6606 drives failing
simultaneously is that I never hear the eight non-reporting drives attempt to
spin up.  In my limited experience, a 6606 drive with stiction is easy to hear
attempt to start.  Even with the covers off (so I could try tapping on them) I
don't hear any sound from any of the eight.  Which leads me to believe the 6502
is not telling them to start, as opposed to the 6606 themselves being bad.  But
this is just a SWAG.

>The two working drives
>under the MFIOP should appear as well.  

They do.

>Optionally if they Don't appear
>try F10 to display Non-Reporting resources and see if all 8 show up
>there.

All 8 are listed as non-reporting.

Thanks
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.